c igrf.for, version number can be found at the end of this comment.
c-----------------------------------------------------------------------        
C
C FIELDG: Using a the POGO 68/10 mgnetic field model with coefficients 
C         valid for 1973 used in an early version of IRI. Can be selected 
C         with JF(18)=.false.
C
C IGRF subroutines and functions: 
C    IGRF_SUB, IGRF_DIP, FINDB0, SHELLG, STOER, FELDG, FELDCOF, GETSHC, 
C    INTERSHC, EXTRASHC, GEODIP, fmodip
C
C CGM coordinates: GEOCGM01, OVL_ANG, CGMGLA, CGMGLO, DFR1DR, 
C    AZM_ANG, MLTUT, MFC, FTPRNT, GEOLOW, CORGEO, GEOCOR, SHAG, RIGHT, 
C    IGRF, RECALC, SPHCAR, BSPCAR, GEOMAG, MAGSM, SMGSM
C
C MLT computation: CLCMLT, DPMTRX
C
C CONVER for computation of Corrected Geomagnetic Coordinates is in 
C    IRIFUN.FOR
c- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
c Required i/o units:  
c  KONSOL= 6 Program messages (used when jf(12)=.true. -> konsol)
c  KONSOL=11 Program messages (used when jf(12)=.false. -> MESSAGES.TXT)
c
c     COMMON/iounit/konsol,mess is used to pass the value of KONSOL from 
c     IRISUB to IRIFUN and IGRF. If mess=false then messages are turned off.
c     
c  UNIT=14 IGRF/GETSHC: IGRF coeff. (DGRF%%%%.DAT or IGRF%%%%.DAT, %%%%=year)
c- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Corrections:
C 11/01/91 SHELLG: lowest starting point for B0 search is 2  
C  1/27/92 Adopted to IGRF-91 coeffcients model
C  2/05/92 Reduce variable names: INTER(P)SHC,EXTRA(P)SHC,INITI(ALI)ZE
C  8/08/95 Updated to IGRF-45-95; new coeff. DGRF90, IGRF95, IGRF95S
C  5/31/00 Updated to IGRF-45-00; new coeff.: IGRF00, IGRF00s

C-Version-mm/dd/yy-Description (Person reporting the correction)
C 2000.01 05/07/01 initial version
C 2000.02 07/11/01 replace feldi(xi,h) by feldi (P. Wilkinson)
C 2000.02 07/11/01 variables EGNR, AGNR,OGNR not used (P. Wilkinson)
c 2000.01 10/28/02 replace TAB/6 blanks, enforce 72/line (D. Simpson)
C 2000.02 11/08/02 change unit for coefficients to 14
C 2000.03 06/05/03 correct DIPL computation (V. Truhlik)
C 2005.00 03/24/05 Updated to IGRF-45-10; new coeff.: IGRF05, IGRF05s
C 2005.00 04/25/05 CALL FELDI and DO 1111 I=1,7 (Alexey Petrov)
C 2005.01 11/10/05 added igrf_dip and geodip (MLAT) 
C 2005.02 11/10/05 FELDCOF: updated to IGRF-10 version
C 2005.03 12/21/06 GH2(120) -> GH2(144)
C 2007.00 05/18/07 Release of IRI-2007
C 2007.01 07/22/09 SHELLG: NMAX=13 for DGRF00, IGRF05; H/G-arrays(195)
C 2007.08 07/30/09 SHELLG,STOER,FELDG,FELDCOF: NMAX=13; H/G-arrays(195) 
C 2007.10 02/26/10 FELDCOF: updated to IGRF-11; DGRF05, IGRF10, IGRF10S
C 2007.11 04/27/10 RECALC: updated to IGRF-11
C 2007.11 04/27/10 Make all arrays(195) to arrays(196) 
C 2007.11 04/27/10 FELDCOF: corrected Filmod and also IGRF10.DAT
C 2007.11 04/29/10 New files dgrf%%%%.asc; new GETSHC; char*12 to 13
C 2007.11 04/29/10 H/H-arrays(196); FELDCOF: corr. IGRF00 and .00S
C
C 2012.00 10/05/11 IRI-2012: bottomside B0 B1 model (SHAMDB0D, SHAB1D),
C 2012.00 10/05/11    bottomside Ni model (iriflip.for), auroral foE
C 2012.00 10/05/11    storm model (storme_ap), Te with PF10.7 (elteik),
C 2012.00 10/05/11    oval kp model (auroral_boundary), IGRF-11(igrf.for), 
C 2012.00 10/05/11    NRLMSIS00 (cira.for), CGM coordinates, F10.7 daily
C 2012.00 10/05/11    81-day 365-day indices (apf107.dat), ap->kp (ckp),
C 2012.00 10/05/11    array size change jf(50) outf(20,1000), oarr(100).
C 2012.01 12/17/12 igrf_dip: Add magnetic declination as output parameter
C 2012.02 07/20/14 igrf_dip,FTPRNT,RECALC: ASIN(x): abs(x)>1.0 x=sign(1.,x)
C 2012.03 07/24/14 COMMON/iounit: added 'mess' 
C 2012.04 02/10/15 Updating to IGRF-12 (2015)
C 2012.05 04/16/15 Versioning now based on year of major releases
C 2012.06 07/12/15 use mess,konsol in IGRF and RECALC
C 2016.01 08/23/15 initialization of Earth constants moved to IRI_SUB
C 2016.02 10/14/15 CLCMLT,DPMTRX <--- IRIFUN.FOR
C 2016.02 10/14/15 RECALC: update with IGRF-12 until 2020
C 2016.02 10/14/15 IGRF_SUB,_DIP: move CALL FELDCOF to IRISUB.FOR
C 2016.02 10/14/15 FELDCOF,SHELLG: DIMO to COMMON/IGRF1/
C 2016.03 02/17/16 GEODIP: add PI to CONST
C 2016.04 07/07/17 IGRF: updated with newest 2010, 2015, 2015s coeff.
C 2016.05 03/25/19 GEODIP,SPHCAR,GEOMAG: improved COMMENTS
C 2020.01 03/05/20 FELDCOF:updated to IGRF-13 (2020)
C 2020.02 09/08/20 Comment RECALC: IYR outside (P. Coisson)
C 2020.03 09/20/21 Corrected INTERVAL 1900-2025 in write statement
C 2020.03 09/20/21 RECALC: DT=..2015, ..2020 (R. Panfili)
C 2020.04 04/04/24 Moved FIELDG from IRIFUN.FOR to this file
C 2020.05 02/05/25 FELDCOF, RECALC: updated to IGRF-14 (2025)
C 2020.06 02/17/25 IGRF: to IGRF-14 & corr. 2020 and 2015 coeff.
c-----------------------------------------------------------------------        
C
C
      SUBROUTINE FIELDG(DLAT,DLONG,ALT,X,Y,Z,F,DIP,DEC,SMODIP)                  
C THIS IS A SPECIAL VERSION OF THE POGO 68/10 MAGNETIC FIELD                    
C LEGENDRE MODEL. TRANSFORMATION COEFF. G(144) VALID FOR 1973.                  
C INPUT: DLAT, DLONG=GEOGRAPHIC COORDINATES/DEG.(-90/90,0/360),                 
C        ALT=ALTITUDE/KM.                          
C OUTPUT: F TOTAL FIELD (GAUSS), Z DOWNWARD VERTICAL COMPONENT                  
C        X,Y COMPONENTS IN THE EQUATORIAL PLANE (X TO ZERO LONGITUDE).          
C        DIP INCLINATION ANGLE(DEGREE). SMODIP RAWER'S MODFIED DIP.             
C SHEIK,1977.         
      DIMENSION H(144),XI(3),G(144),FEL1(72),FEL2(72)
      COMMON/CONST/UMR,PI                           
      DATA FEL1/0.0, 0.1506723,0.0101742, -0.0286519, 0.0092606,                
     & -0.0130846, 0.0089594, -0.0136808,-0.0001508, -0.0093977,                
     & 0.0130650, 0.0020520, -0.0121956, -0.0023451, -0.0208555,                
     & 0.0068416,-0.0142659, -0.0093322, -0.0021364, -0.0078910,                
     & 0.0045586,  0.0128904, -0.0002951, -0.0237245,0.0289493,                 
     & 0.0074605, -0.0105741, -0.0005116, -0.0105732, -0.0058542,               
     &0.0033268, 0.0078164,0.0211234, 0.0099309, 0.0362792,                     
     &-0.0201070,-0.0046350,-0.0058722,0.0011147,-0.0013949,                    
     & -0.0108838,  0.0322263, -0.0147390,  0.0031247, 0.0111986,               
     & -0.0109394,0.0058112,  0.2739046, -0.0155682, -0.0253272,                
     &  0.0163782, 0.0205730,  0.0022081, 0.0112749,-0.0098427,                 
     & 0.0072705, 0.0195189, -0.0081132, -0.0071889, -0.0579970,                
     & -0.0856642, 0.1884260,-0.7391512, 0.1210288, -0.0241888,                 
     & -0.0052464, -0.0096312, -0.0044834, 0.0201764,  0.0258343,               
     &0.0083033,  0.0077187/                       
      DATA FEL2/0.0586055,0.0102236,-0.0396107,    
     & -0.0167860, -0.2019911, -0.5810815,0.0379916,  3.7508268,                
     & 1.8133030, -0.0564250, -0.0557352, 0.1335347, -0.0142641,                
     & -0.1024618,0.0970994, -0.0751830,-0.1274948, 0.0402073,                  
     &  0.0386290, 0.1883088,  0.1838960, -0.7848989,0.7591817,                 
     & -0.9302389,-0.8560960, 0.6633250, -4.6363869, -13.2599277,               
     & 0.1002136,  0.0855714,-0.0991981, -0.0765378,-0.0455264,                 
     &  0.1169326, -0.2604067, 0.1800076, -0.2223685, -0.6347679,               
     &0.5334222, -0.3459502,-0.1573697,  0.8589464, 1.7815990,                  
     &-6.3347645, -3.1513653, -9.9927750,13.3327637, -35.4897308,               
     &37.3466339, -0.5257398,  0.0571474, -0.5421217,  0.2404770,               
     & -0.1747774,-0.3433644, 0.4829708,0.3935944, 0.4885033,                   
     &  0.8488121, -0.7640999, -1.8884945, 3.2930784,-7.3497229,                
     & 0.1672821,-0.2306652, 10.5782146, 12.6031065, 8.6579742,                 
     & 215.5209961, -27.1419220,22.3405762,1108.6394043/                        
      K=0             
      DO 10 I=1,72    
      K=K+1           
      G(K)=FEL1(I)    
10    G(72+K)=FEL2(I)                              
      RLAT=DLAT*UMR   
      CT=SIN(RLAT)    
      ST=COS(RLAT)    
      NMAX=11         
      D=SQRT(40680925.0-272336.0*CT*CT)            
      RLONG=DLONG*UMR                              
      CP=COS(RLONG)   
      SP=SIN(RLONG)   
      ZZZ=(ALT+40408589.0/D)*CT/6371.2             
      RHO=(ALT+40680925.0/D)*ST/6371.2             
      XXX=RHO*CP      
      YYY=RHO*SP      
      RQ=1.0/(XXX*XXX+YYY*YYY+ZZZ*ZZZ)             
      XI(1)=XXX*RQ    
      XI(2)=YYY*RQ    
      XI(3)=ZZZ*RQ    
      IHMAX=NMAX*NMAX+1                            
      LAST=IHMAX+NMAX+NMAX                         
      IMAX=NMAX+NMAX-1                             
      DO 100 I=IHMAX,LAST                          
100   H(I)=G(I)       
      DO 200 K=1,3,2  
      I=IMAX          
      IH=IHMAX        
300   IL=IH-I         
      F1=2./(I-K+2.)  
      X1=XI(1)*F1     
      Y1=XI(2)*F1     
      Z1=XI(3)*(F1+F1)                             
      I=I-2           
      IF((I-1).LT.0) GOTO 400                      
      IF((I-1).EQ.0) GOTO 500                      
      DO 600 M=3,I,2  
      H(IL+M+1)=G(IL+M+1)+Z1*H(IH+M+1)+X1*(H(IH+M+3)-H(IH+M-1))-                
     &Y1*(H(IH+M+2)+H(IH+M-2))                     
      H(IL+M)=G(IL+M)+Z1*H(IH+M)+X1*(H(IH+M+2)-H(IH+M-2))+                      
     &Y1*(H(IH+M+3)+H(IH+M-1))                     
600   CONTINUE        
500   H(IL+2)=G(IL+2)+Z1*H(IH+2)+X1*H(IH+4)-Y1*(H(IH+3)+H(IH))                  
      H(IL+1)=G(IL+1)+Z1*H(IH+1)+Y1*H(IH+4)+X1*(H(IH+3)-H(IH))                  
400   H(IL)=G(IL)+Z1*H(IH)+2.0*(X1*H(IH+1)+Y1*H(IH+2))                          
700   IH=IL           
      IF(I.GE.K) GOTO 300                          
200   CONTINUE        
      S=0.5*H(1)+2.0*(H(2)*XI(3)+H(3)*XI(1)+H(4)*XI(2))                         
      XT=(RQ+RQ)*SQRT(RQ)                          
      X=XT*(H(3)-S*XXX)                            
      Y=XT*(H(4)-S*YYY)                            
      Z=XT*(H(2)-S*ZZZ)                            
      F=SQRT(X*X+Y*Y+Z*Z)                          
      BRH0=Y*SP+X*CP  
      Y=Y*CP-X*SP     
      X=Z*ST-BRH0*CT  
      Z=-Z*CT-BRH0*ST 
        zdivf=z/f
        IF(ABS(zdivf).GT.1.) zdivf=SIGN(1.,zdivf)
      DIP=ASIN(zdivf)
        ydivs=y/sqrt(x*x+y*y)  
        IF(ABS(ydivs).GT.1.) ydivs=SIGN(1.,ydivs)
      DEC=ASIN(ydivs)
        dipdiv=DIP/SQRT(DIP*DIP+ST)
        IF(ABS(dipdiv).GT.1.) dipdiv=SIGN(1.,dipdiv)
      SMODIP=ASIN(dipdiv)
      DIP=DIP/UMR     
      DEC=DEC/UMR     
      SMODIP=SMODIP/UMR                            
      RETURN          
      END   
c
c
        subroutine igrf_sub(xlat,xlong,year,height,
     &          xl,icode,dipl,babs)
c-----------------------------------------------------------------------        
c INPUT:
c    xlat      geodatic latitude in degrees
c    xlong     geodatic longitude in degrees
c    year      decimal year (year+(month-0.5)/12.0-0.5 or 
c                  year+day-of-year/365 or ../366 if leap year) 
c    height    height in km
c OUTPUT:
c    xl        L value
c    icode      =1  L is correct; =2  L is not correct;
c               =3  an approximation is used
c    dipl      dip latitude in degrees
c    babs      magnetic field strength in Gauss
c-----------------------------------------------------------------------        

      REAL              LATI,LONGI
      COMMON /CONST/UMR,PI
      
      lati=xlat
      longi=xlong
      CALL FELDG(LATI,LONGI,HEIGHT,BNORTH,BEAST,BDOWN,BABS)
      CALL SHELLG(LATI,LONGI,HEIGHT,XL,ICODE,BAB1)
      DIPL=ATAN(BDOWN/2.0/sqrt(BNORTH*BNORTH+BEAST*BEAST))/umr
      RETURN
      END
c
c
      subroutine igrf_dip(xlat,xlong,year,height,dec,dip,dipl,ymodip)
c-----------------------------------------------------------------------        
c INPUT:
c    xlat      geodatic latitude in degrees
c    xlong     geodatic longitude in degrees
c    year      decimal year (year+month/12.0-0.5 or 
c                  year+day-of-year/365 or ../366 if leap year) 
c    height    height in km
c OUTPUT:
c    dec       magnetic declination in degrees
c    dip       magnetic inclination (dip) in degrees
c    dipl      dip latitude in degrees
c    ymodip    modified dip latitude = asin{dip/sqrt[dip^2+cos(LATI)]} 
c-----------------------------------------------------------------------        

      COMMON /CONST/UMR,PI

	  xlati = xlat
	  xlongi = xlong
	  h = height
      CALL FELDG(XLATI,XLONGI,H,BNORTH,BEAST,BDOWN,BABS)
          DECARG=BEAST/SQRT(BEAST*BEAST+BNORTH*BNORTH)
          IF(ABS(DECARG).GT.1.) DECARG=SIGN(1.,DECARG)
      DEC=ASIN(DECARG)
          BDBA=BDOWN/BABS
          IF(ABS(BDBA).GT.1.) BDBA=SIGN(1.,BDBA)
      DIP=ASIN(BDBA)
          dipdiv=DIP/SQRT(DIP*DIP+cos(XLATI*UMR))
          IF(ABS(dipdiv).GT.1.) dipdiv=SIGN(1.,dipdiv)
      SMODIP=ASIN(dipdiv)        
c       DIPL1=ATAN(0.5*TAN(DIP))/UMR
      DIPL=ATAN(BDOWN/2.0/sqrt(BNORTH*BNORTH+BEAST*BEAST))/umr
      YMODIP=SMODIP/UMR                            
      DEC=DEC/UMR
      DIP=DIP/UMR
      RETURN
      END
c
c
      SUBROUTINE SHELLG(GLAT,GLON,ALT,FL,ICODE,B0)
c-----------------------------------------------------------------------        
C CALCULATES L-VALUE FOR SPECIFIED GEODAETIC COORDINATES, ALTITUDE
C AND GEMAGNETIC FIELD MODEL.
C REF: G. KLUGE, EUROPEAN SPACE OPERATIONS CENTER, INTERNAL NOTE 
C      NO. 67, 1970.
C      G. KLUGE, COMPUTER PHYSICS COMMUNICATIONS 3, 31-35, 1972
c-----------------------------------------------------------------------        
C CHANGES (D. BILITZA, NOV 87):
C   - USING CORRECT DIPOL MOMENT I.E.,DIFFERENT COMMON/MODEL/
C   - USING IGRF EARTH MAGNETIC FIELD MODELS FROM 1945 TO 1990
C 09/07/22 NMAX=13 for DGRF00 and IGRF05; H/G-arrays(195)
c-----------------------------------------------------------------------        
C  INPUT:  ENTRY POINT SHELLG
C             GLAT  GEODETIC LATITUDE IN DEGREES (NORTH)
C             GLON  GEODETIC LONGITUDE IN DEGREES (EAST)
C             ALT   ALTITUDE IN KM ABOVE SEA LEVEL
C
C          ENTRY POINT SHELLC
C             V(3)  CARTESIAN COORDINATES IN EARTH RADII (6371.2 KM)
C                     X-AXIS POINTING TO EQUATOR AT 0 LONGITUDE
C                     Y-AXIS POINTING TO EQUATOR AT 90 LONG.
C                     Z-AXIS POINTING TO NORTH POLE
C
C          DIMO     DIPOL MOMENT IN GAUSS (NORMALIZED TO EARTH RADIUS) 
C
C          COMMON 
C             X(3)    NOT USED
C             H(144)  FIELD MODEL COEFFICIENTS ADJUSTED FOR SHELLG
c-----------------------------------------------------------------------        
C  OUTPUT: FL           L-VALUE
C          ICODE        =1 NORMAL COMPLETION
C                       =2 UNPHYSICAL CONJUGATE POINT (FL MEANINGLESS)
C                       =3 SHELL PARAMETER GREATER THAN LIMIT UP TO
C                          WHICH ACCURATE CALCULATION IS REQUIRED;
C                          APPROXIMATION IS USED.
C          B0           MAGNETIC FIELD STRENGTH IN GAUSS
c-----------------------------------------------------------------------        
      DIMENSION         V(3),U(3,3),P(8,100),SP(3)
      COMMON/IGRF2/     X(3),H(196)
      COMMON/FIDB0/     SP	/CONST/UMR,PI      
      COMMON/IGRF1/     ERA,AQUAD,BQUAD,DIMO
C
C-- RMIN, RMAX ARE BOUNDARIES FOR IDENTIFICATION OF ICODE=2 AND 3
C-- STEP IS STEP SIZE FOR FIELD LINE TRACING
C-- STEQ IS STEP SIZE FOR INTEGRATION
C 
      DATA RMIN,RMAX    /0.05,1.01/
      DATA STEP,STEQ    /0.20,0.03/
        BEQU=1.E10
C*****ENTRY POINT  SHELLG  TO BE USED WITH GEODETIC CO-ORDINATES
      RLAT=GLAT*UMR
      CT=SIN(RLAT)                                              
      ST=COS(RLAT)                                              
      D=SQRT(AQUAD-(AQUAD-BQUAD)*CT*CT)
      X(1)=(ALT+AQUAD/D)*ST/ERA
      X(3)=(ALT+BQUAD/D)*CT/ERA
      RLON=GLON*UMR
      X(2)=X(1)*SIN(RLON)                                       
      X(1)=X(1)*COS(RLON)                                       
      GOTO9                                                     
      ENTRY SHELLC(V,FL,B0)                                     
C*****ENTRY POINT  SHELLC  TO BE USED WITH CARTESIAN CO-ORDINATES
      X(1)=V(1)                                                  
      X(2)=V(2)                                                  
      X(3)=V(3)                                                  
C*****CONVERT TO DIPOL-ORIENTED CO-ORDINATES                     
      DATA U/                 +0.3511737,-0.9148385,-0.1993679,  
     A                        +0.9335804,+0.3583680,+0.0000000,  
     B                        +0.0714471,-0.1861260,+0.9799247/  
9     RQ=1./(X(1)*X(1)+X(2)*X(2)+X(3)*X(3))
      R3H=SQRT(RQ*SQRT(RQ))                                      
      P(1,2)=(X(1)*U(1,1)+X(2)*U(2,1)+X(3)*U(3,1))*R3H           
      P(2,2)=(X(1)*U(1,2)+X(2)*U(2,2)            )*R3H           
      P(3,2)=(X(1)*U(1,3)+X(2)*U(2,3)+X(3)*U(3,3))*RQ            
C*****FIRST THREE POINTS OF FIELD LINE                           
      STEP=-SIGN(STEP,P(3,2))                                    
      CALL STOER(P(1,2),BQ2,R2)                                  
      B0=SQRT(BQ2)                                               
      P(1,3)=P(1,2)+0.5*STEP*P(4,2)                              
      P(2,3)=P(2,2)+0.5*STEP*P(5,2)                              
      P(3,3)=P(3,2)+0.5*STEP                                     
      CALL STOER(P(1,3),BQ3,R3)                                  
      P(1,1)=P(1,2)-STEP*(2.*P(4,2)-P(4,3))                      
      P(2,1)=P(2,2)-STEP*(2.*P(5,2)-P(5,3))                      
      P(3,1)=P(3,2)-STEP                                         
      CALL STOER(P(1,1),BQ1,R1)                                  
      P(1,3)=P(1,2)+STEP*(20.*P(4,3)-3.*P(4,2)+P(4,1))/18.       
      P(2,3)=P(2,2)+STEP*(20.*P(5,3)-3.*P(5,2)+P(5,1))/18.       
      P(3,3)=P(3,2)+STEP                                         
      CALL STOER(P(1,3),BQ3,R3)                                  
C*****INVERT SENSE IF REQUIRED                                   
      IF(BQ3.LE.BQ1)GOTO2                                        
      STEP=-STEP                                                 
      R3=R1                                                      
      BQ3=BQ1                                                    
      DO 1 I=1,7                                                 
      ZZ=P(I,1)                                                  
      P(I,1)=P(I,3)                                              
1     P(I,3)=ZZ                                                  
C*****SEARCH FOR LOWEST MAGNETIC FIELD STRENGTH
2     IF(BQ1.LT.BEQU) THEN
        BEQU=BQ1
        IEQU=1
        ENDIF
      IF(BQ2.LT.BEQU) THEN
        BEQU=BQ2
        IEQU=2
        ENDIF
      IF(BQ3.LT.BEQU) THEN
        BEQU=BQ3
        IEQU=3
        ENDIF
C*****INITIALIZATION OF INTEGRATION LOOPS                        
      STEP12=STEP/12.
      STEP2=STEP+STEP                                            
      STEQ=SIGN(STEQ,STEP)                                       
      FI=0.                                                      
      ICODE=1                                                    
      ORADIK=0.                                                  
      OTERM=0.                                                   
      STP=R2*STEQ                                                
      Z=P(3,2)+STP                                               
      STP=STP/0.75
      P(8,1)=STEP2*(P(1,1)*P(4,1)+P(2,1)*P(5,1))                 
      P(8,2)=STEP2*(P(1,2)*P(4,2)+P(2,2)*P(5,2))
C*****MAIN LOOP (FIELD LINE TRACING)                             
      DO 3 N=3,3333                                              
C*****CORRECTOR (FIELD LINE TRACING)                             
      P(1,N)=P(1,N-1)+STEP12*(5.*P(4,N)+8.*P(4,N-1)-P(4,N-2))    
      P(2,N)=P(2,N-1)+STEP12*(5.*P(5,N)+8.*P(5,N-1)-P(5,N-2))    
C*****PREPARE EXPANSION COEFFICIENTS FOR INTERPOLATION           
C*****OF SLOWLY VARYING QUANTITIES                               
      P(8,N)=STEP2*(P(1,N)*P(4,N)+P(2,N)*P(5,N))                 
      C0=P(1,N-1)**2+P(2,N-1)**2                                 
      C1=P(8,N-1)                                                
      C2=(P(8,N)-P(8,N-2))*0.25                                  
      C3=(P(8,N)+P(8,N-2)-C1-C1)/6.0
      D0=P(6,N-1)                                                
      D1=(P(6,N)-P(6,N-2))*0.5
      D2=(P(6,N)+P(6,N-2)-D0-D0)*0.5                             
      E0=P(7,N-1)
      E1=(P(7,N)-P(7,N-2))*0.5                                   
      E2=(P(7,N)+P(7,N-2)-E0-E0)*0.5                             
C*****INNER LOOP (FOR QUADRATURE)                                
4     T=(Z-P(3,N-1))/STEP                                        
      IF(T.GT.1.)GOTO5                                           
      HLI=0.5*(((C3*T+C2)*T+C1)*T+C0)                            
      ZQ=Z*Z
      R=HLI+SQRT(HLI*HLI+ZQ)
      IF(R.LE.RMIN)GOTO30                               
      RQ=R*R
      FF=SQRT(1.+3.*ZQ/RQ)                              
      RADIK=B0-((D2*T+D1)*T+D0)*R*RQ*FF                 
      IF(R-RMAX)44,44,45                                
45    ICODE=2                                           
      RADIK=RADIK-12.*(R-RMAX)**2                       
44    IF(RADIK+RADIK.LE.ORADIK) GOTO 10
      TERM=SQRT(RADIK)*FF*((E2*T+E1)*T+E0)/(RQ+ZQ)      
      FI=FI+STP*(OTERM+TERM)                            
      ORADIK=RADIK                                      
      OTERM=TERM                                        
      STP=R*STEQ                                        
      Z=Z+STP                                           
      GOTO4                                             
C*****PREDICTOR (FIELD LINE TRACING)                    
5     P(1,N+1)=P(1,N)+STEP12*(23.*P(4,N)-16.*P(4,N-1)+5.*P(4,N-2))  
      P(2,N+1)=P(2,N)+STEP12*(23.*P(5,N)-16.*P(5,N-1)+5.*P(5,N-2))  
      P(3,N+1)=P(3,N)+STEP                                          
      CALL STOER(P(1,N+1),BQ3,R3)                                   
C*****SEARCH FOR LOWEST MAGNETIC FIELD STRENGTH
      IF(BQ3.LT.BEQU) THEN
        IEQU=N+1
        BEQU=BQ3
        ENDIF
3     CONTINUE
10    IF(IEQU.lt.2) IEQU=2 
      SP(1)=P(1,IEQU-1)
      SP(2)=P(2,IEQU-1)
      SP(3)=P(3,IEQU-1)
      IF(ORADIK.LT.1E-15)GOTO11                                     
      FI=FI+STP/0.75*OTERM*ORADIK/(ORADIK-RADIK)              
C
C-- The minimal allowable value of FI was changed from 1E-15 to 1E-12,
C-- because 1E-38 is the minimal allowable arg. for ALOG in our envir.
C-- D. Bilitza, Nov 87.
C
11          FI=0.5*ABS(FI)/SQRT(B0)+1E-12                       
C
C*****COMPUTE L FROM B AND I.  SAME AS CARMEL IN INVAR.  
C
C-- Correct dipole moment is used here. D. Bilitza, Nov 87.
C
      DIMOB0=DIMO/B0
      arg1=alog(FI)
      arg2=alog(DIMOB0)
c      arg = FI*FI*FI/DIMOB0
c      if(abs(arg).gt.88.0) arg=88.0
      XX=3*arg1-arg2
      IF(XX.GT.23.0) GOTO 776   
      IF(XX.GT.11.7) GOTO 775  
      IF(XX.GT.+3.0) GOTO 774    
      IF(XX.GT.-3.0) GOTO 773   
      IF(XX.GT.-22.) GOTO 772  
  771 GG=3.33338E-1*XX+3.0062102E-1                                 
      GOTO777                                                          
  772 GG=((((((((-8.1537735E-14*XX+8.3232531E-13)*XX+1.0066362E-9)*XX+  
     &  8.1048663E-8)*XX+3.2916354E-6)*XX+8.2711096E-5)*XX+ 
     &  1.3714667E-3)*XX+1.5017245E-2)*XX+4.3432642E-1)*XX+
     &  6.2337691E-1                 
      GOTO777                                                           
  773 GG=((((((((2.6047023E-10*XX+2.3028767E-9)*XX-2.1997983E-8)*XX-    
     &  5.3977642E-7)*XX-3.3408822E-6)*XX+3.8379917E-5)*XX+ 
     &  1.1784234E-3)*XX+1.4492441E-2)*XX+4.3352788E-1)*XX+
     &  6.228644E-1                  
      GOTO777                                                           
  774 GG=((((((((6.3271665E-10*XX-3.958306E-8)*XX+9.9766148E-07)*XX-    
     &  1.2531932E-5)*XX+7.9451313E-5)*XX-3.2077032E-4)*XX+ 
     &  2.1680398E-3)*XX+1.2817956E-2)*XX+4.3510529E-1)*XX+
     &  6.222355E-1                  
      GOTO777                                                           
  775 GG=(((((2.8212095E-8*XX-3.8049276E-6)*XX+2.170224E-4)*XX-
     &  6.7310339E-3)*XX+1.2038224E-1)*XX-1.8461796E-1)*XX+
     &  2.0007187E0             
      GOTO777                                                           
  776 GG=XX-3.0460681E0                                                 
  777 FL=EXP(ALOG((1.+EXP(GG))*DIMOB0)/3.0)
      RETURN                                                            
C*****APPROXIMATION FOR HIGH VALUES OF L.                               
30    ICODE=3                                                           
      T=-P(3,N-1)/STEP                                                  
      FL=1./(ABS(((C3*T+C2)*T+C1)*T+C0)+1E-15)                          
      RETURN                                                            
      END                                                               
C
C
      SUBROUTINE STOER(P,BQ,R)                                          
C*******************************************************************
C* SUBROUTINE USED FOR FIELD LINE TRACING IN SHELLG                *
C* CALLS ENTRY POINT FELDI IN GEOMAGNETIC FIELD SUBROUTINE FELDG   *
C
C 09/07/22 NMAX=13 for DGRF00 and IGRF05; H/G-arrays(195)
C*******************************************************************
      DIMENSION         P(7),U(3,3)
      COMMON/IGRF2/     XI(3),H(196)
C*****XM,YM,ZM  ARE GEOMAGNETIC CARTESIAN INVERSE CO-ORDINATES          
      ZM=P(3)                                                           
      FLI=P(1)*P(1)+P(2)*P(2)+1E-15
      R=0.5*(FLI+SQRT(FLI*FLI+(ZM+ZM)**2))
      RQ=R*R
      WR=SQRT(R)                                                        
      XM=P(1)*WR                                                        
      YM=P(2)*WR                                                        
C*****TRANSFORM TO GEOGRAPHIC CO-ORDINATE SYSTEM                        
      DATA U/                 +0.3511737,-0.9148385,-0.1993679,         
     A                        +0.9335804,+0.3583680,+0.0000000,         
     B                        +0.0714471,-0.1861260,+0.9799247/         
      XI(1)=XM*U(1,1)+YM*U(1,2)+ZM*U(1,3)                               
      XI(2)=XM*U(2,1)+YM*U(2,2)+ZM*U(2,3)                               
      XI(3)=XM*U(3,1)          +ZM*U(3,3)                               
C*****COMPUTE DERIVATIVES                                               
c      CALL FELDI(XI,H)                                                  
      CALL FELDI
      Q=H(1)/RQ                                                         
      DX=H(3)+H(3)+Q*XI(1)                                              
      DY=H(4)+H(4)+Q*XI(2)                                              
      DZ=H(2)+H(2)+Q*XI(3)                                              
C*****TRANSFORM BACK TO GEOMAGNETIC CO-ORDINATE SYSTEM                  
      DXM=U(1,1)*DX+U(2,1)*DY+U(3,1)*DZ                                 
      DYM=U(1,2)*DX+U(2,2)*DY                                           
      DZM=U(1,3)*DX+U(2,3)*DY+U(3,3)*DZ                                 
      DR=(XM*DXM+YM*DYM+ZM*DZM)/R                                       
C*****FORM SLOWLY VARYING EXPRESSIONS                                   
      P(4)=(WR*DXM-0.5*P(1)*DR)/(R*DZM)                                 
      P(5)=(WR*DYM-0.5*P(2)*DR)/(R*DZM)                                 
      DSQ=RQ*(DXM*DXM+DYM*DYM+DZM*DZM)
      BQ=DSQ*RQ*RQ
      P(6)=SQRT(DSQ/(RQ+3.*ZM*ZM))                                      
      P(7)=P(6)*(RQ+ZM*ZM)/(RQ*DZM)                                     
      RETURN                                                            
      END                                                               
C
C
      SUBROUTINE FELDG(GLAT,GLON,ALT,BNORTH,BEAST,BDOWN,BABS)           
c-----------------------------------------------------------------------        
C CALCULATES EARTH MAGNETIC FIELD FROM SPHERICAL HARMONICS MODEL
C REF: G. KLUGE, EUROPEAN SPACE OPERATIONS CENTRE, INTERNAL NOTE 61, 
C      1970.
c-----------------------------------------------------------------------        
C CHANGES (D. BILITZA, NOV 87):
C   - FIELD COEFFICIENTS IN BINARY DATA FILES INSTEAD OF BLOCK DATA
C   - CALCULATES DIPOL MOMENT
C 09/07/22 NMAX=13 for DGRF00 and IGRF05; H/G-arrays(195)
c-----------------------------------------------------------------------        
C  INPUT:  ENTRY POINT FELDG
C               GLAT  GEODETIC LATITUDE IN DEGREES (NORTH)
C               GLON  GEODETIC LONGITUDE IN DEGREES (EAST)
C               ALT   ALTITUDE IN KM ABOVE SEA LEVEL
C
C          ENTRY POINT FELDC
C               V(3)  CARTESIAN COORDINATES IN EARTH RADII (6371.2 KM)
C                       X-AXIS POINTING TO EQUATOR AT 0 LONGITUDE
C                       Y-AXIS POINTING TO EQUATOR AT 90 LONG.
C                       Z-AXIS POINTING TO NORTH POLE
C
C          COMMON BLANK AND ENTRY POINT FELDI ARE NEEDED WHEN USED
C            IN CONNECTION WITH L-CALCULATION PROGRAM SHELLG.
C       
C          COMMON /MODEL/ AND /IGRF1/
C               UMR     = ATAN(1.0)*4./180.   <DEGREE>*UMR=<RADIANT>
C               ERA     EARTH RADIUS FOR NORMALIZATION OF CARTESIAN 
C                       COORDINATES (6371.2 KM)
C               AQUAD, BQUAD   SQUARE OF MAJOR AND MINOR HALF AXIS OF 
C                       EARTH ELLIPSOID AS RECOMMENDED BY INTERNAT. 
C                       ASTRONOMICAL UNION (6378.160, 6356.775 KM).
C               NMAX    MAXIMUM ORDER OF SPHERICAL HARMONICS
C               TIME    YEAR (DECIMAL: 1973.5) FOR WHICH MAGNETIC 
C                       FIELD IS TO BE CALCULATED
C               G(M)    NORMALIZED FIELD COEFFICIENTS (SEE FELDCOF)
C                       M=NMAX*(NMAX+2)
c-----------------------------------------------------------------------        
C  OUTPUT: BABS   MAGNETIC FIELD STRENGTH IN GAUSS
C          BNORTH, BEAST, BDOWN   COMPONENTS OF THE FIELD WITH RESPECT
C                 TO THE LOCAL GEODETIC COORDINATE SYSTEM, WITH AXIS
C                 POINTING IN THE TANGENTIAL PLANE TO THE NORTH, EAST
C                 AND DOWNWARD.   
C-----------------------------------------------------------------------
      DIMENSION         V(3),B(3)   
      CHARACTER*13      NAME
      COMMON/IGRF2/XI(3),H(196)
      COMMON/MODEL/NMAX,TIME,G(196),NAME  
      COMMON/IGRF1/ERA,AQUAD,BQUAD,DIMO    /CONST/UMR,PI

C
C-- IS RECORDS ENTRY POINT
C
C*****ENTRY POINT  FELDG  TO BE USED WITH GEODETIC CO-ORDINATES         
      IS=1                                                              
      RLAT=GLAT*UMR
      CT=SIN(RLAT)                                                      
      ST=COS(RLAT)                                                      
      D=SQRT(AQUAD-(AQUAD-BQUAD)*CT*CT)                                 
      RLON=GLON*UMR
      CP=COS(RLON)                                                      
      SP=SIN(RLON)                                                      
      ZZZ=(ALT+BQUAD/D)*CT/ERA
      RHO=(ALT+AQUAD/D)*ST/ERA
      XXX=RHO*CP                                                       
      YYY=RHO*SP                                                       
      GOTO 10                                                            

C*****ENTRY POINT  FELDC  TO BE USED WITH CARTESIAN CO-ORDINATES        
      ENTRY FELDC(V,B)                                                  
      IS=2                                                              
      XXX=V(1)                                                          
      YYY=V(2)                                                          
      ZZZ=V(3)                                                          
10    RQ=1./(XXX*XXX+YYY*YYY+ZZZ*ZZZ) 
      XI(1)=XXX*RQ                                                      
      XI(2)=YYY*RQ                                                      
      XI(3)=ZZZ*RQ                                                      
      GOTO 20                                                            

C*****ENTRY POINT  FELDI  USED FOR L COMPUTATION                        
      ENTRY FELDI                                                       
      IS=3                                                              
20    IHMAX=NMAX*NMAX+1                                                 
      LAST=IHMAX+NMAX+NMAX                                              
      IMAX=NMAX+NMAX-1                                                  
      DO 8 I=IHMAX,LAST                                                 
8     	H(I)=G(I)                                                         
      DO 6 K=1,3,2                                                      
      	I=IMAX                                                            
      	IH=IHMAX                                                          
1     	IL=IH-I                                                           
      	F=2./FLOAT(I-K+2)                                                 
      	X=XI(1)*F                                                         
      	Y=XI(2)*F                                                         
      	Z=XI(3)*(F+F)                                                     
      	I=I-2                                                             
      	IF(I-1) 5,4,2
      	                                                      
2     	DO 3 M=3,I,2                                                      
      		H(IL+M+1)=G(IL+M+1)+Z*H(IH+M+1)+X*(H(IH+M+3)-          
     A                H(IH+M-1))-Y*(H(IH+M+2)+H(IH+M-2))           
3     		H(IL+M)=G(IL+M)+Z*H(IH+M)+X*(H(IH+M+2)-                
     A                H(IH+M-2))+Y*(H(IH+M+3)+H(IH+M-1))
                      
4     	H(IL+2)=G(IL+2)+Z*H(IH+2)+X*H(IH+4)-Y*(H(IH+3)+H(IH))             
      	H(IL+1)=G(IL+1)+Z*H(IH+1)+Y*H(IH+4)+X*(H(IH+3)-H(IH))             
5     	H(IL)=G(IL)+Z*H(IH)+2.*(X*H(IH+1)+Y*H(IH+2))                      
      	IH=IL                                                             
      	IF(I.GE.K) GOTO 1                                                   
6     	CONTINUE
                                                          
      IF(IS.EQ.3) RETURN 
                                                      
      S=.5*H(1)+2.*(H(2)*XI(3)+H(3)*XI(1)+H(4)*XI(2))                   
      T=(RQ+RQ)*SQRT(RQ)                                                
      BXXX=T*(H(3)-S*XXX)                                               
      BYYY=T*(H(4)-S*YYY)                                               
      BZZZ=T*(H(2)-S*ZZZ) 
                                                    
      IF(IS.EQ.2) GOTO 7                                                  
      BABS=SQRT(BXXX*BXXX+BYYY*BYYY+BZZZ*BZZZ)
      BEAST=BYYY*CP-BXXX*SP                                             
      BRHO=BYYY*SP+BXXX*CP                                              
      BNORTH=BZZZ*ST-BRHO*CT                                            
      BDOWN=-BZZZ*CT-BRHO*ST                                            
      RETURN 
                                                                 
7     B(1)=BXXX                                                         
      B(2)=BYYY                                                         
      B(3)=BZZZ                                                         
      RETURN                                                            
      END                                                               
C
C
        SUBROUTINE FELDCOF(YEAR)
c-----------------------------------------------------------------------        
C  DETERMINES COEFFICIENTS AND DIPOL MOMENT FROM IGRF MODELS
C
C       INPUT:  YEAR  DECIMAL YEAR FOR WHICH GEOMAGNETIC FIELD IS TO
C                       BE CALCULATED
C                     COMMON/IGRF1/ERAD,AQUAD,BQUAD,DIMO /CONST/UMR,PI
C       OUTPUT:       COMMON/MODEL/NMAX,TIME,GH1,FIL1
C                     COMMON/DIPOL/GHI1,GHI2,GHI3
C
C THE GEOMAGNETIC DIPOL MOMENT (DIMO) IN GAUSS (NORMALIZED TO EARTH'S 
C RADIUS) AT THE TIME (YEAR) IS COMPUTED BUT NOT USED.
C
C 05/31/2000 updated to IGRF-2000 version (###) 
C 03/24/2000 updated to IGRF-2005 version (###) 
C 07/22/2009 NMAX=13 for DGRF00 and IGRF05; H/G-arrays(195)
C 02/26/2010 update to IGRF-11 (2010) (###)  
C 10/05/2011 added COMMON/DIPOL/ for MLT computation in DPMTRX (IRIFUN)
C 02/10/2015 update to IGRF-12 (2015) (###)
C 03/05/2020 update to IGRF-13 (2020) (###)
C 02/05/2025 update to IGRF-14 (2025) (###)
c-----------------------------------------------------------------------        
        CHARACTER*13    FILMOD, FIL1, FIL2           
C ### FILMOD, DTEMOD array-size is number of IGRF maps
        DIMENSION       GH1(196),GH2(196),GHA(196),FILMOD(18),DTEMOD(18)
        DOUBLE PRECISION X,F0,F
 
        COMMON/MODEL/NMAX,TIME,GH1,FIL1
        COMMON/IGRF1/ERAD,AQUAD,BQUAD,DIMO /CONST/UMR,PI
        COMMON/DIPOL/GHI1,GHI2,GHI3

C ### updated coefficient file names and corresponding years
        DATA  FILMOD   / 'dgrf1945.dat','dgrf1950.dat','dgrf1955.dat',           
     1    'dgrf1960.dat','dgrf1965.dat','dgrf1970.dat','dgrf1975.dat',
     2    'dgrf1980.dat','dgrf1985.dat','dgrf1990.dat','dgrf1995.dat',
     3    'dgrf2000.dat','dgrf2005.dat','dgrf2010.dat','dgrf2015.dat',
     4    'dgrf2020.dat','igrf2025.dat','igrf2025s.dat'/
        DATA  DTEMOD / 1945., 1950., 1955., 1960., 1965.,           
     1   1970., 1975., 1980., 1985., 1990., 1995., 2000.,2005.,
     2   2010., 2015., 2020., 2025.,2030./      
C
C ### numye is number of IGRF coefficient files minus 1
C
        NUMYE=17
C
C  IS=0 FOR SCHMIDT NORMALIZATION   IS=1 GAUSS NORMALIZATION
C  IU  IS INPUT UNIT NUMBER FOR IGRF COEFFICIENT SETS
C
        IU = 14
        IS = 0
C-- DETERMINE IGRF-YEARS FOR INPUT-YEAR
        TIME = YEAR
        IYEA = INT(YEAR/5.)*5
        L = (IYEA - 1945)/5 + 1
        IF(L.LT.1) L=1
        IF(L.GT.NUMYE) L=NUMYE         
        DTE1 = DTEMOD(L)   
        FIL1 = FILMOD(L)   
        DTE2 = DTEMOD(L+1) 
        FIL2 = FILMOD(L+1) 
C-- GET IGRF COEFFICIENTS FOR THE BOUNDARY YEARS
        CALL GETSHC (IU, FIL1, NMAX1, ERAD, GH1, IER)  
            IF (IER .NE. 0) STOP                           
        CALL GETSHC (IU, FIL2, NMAX2, ERAD, GH2, IER)  
            IF (IER .NE. 0) STOP
C-- DETERMINE IGRF COEFFICIENTS FOR YEAR
        IF (L .LE. NUMYE-1) THEN                        
          CALL INTERSHC (YEAR, DTE1, NMAX1, GH1, DTE2, 
     1          NMAX2, GH2, NMAX, GHA)                        
        ELSE               
          CALL EXTRASHC (YEAR, DTE1, NMAX1, GH1, NMAX2,     
     1          GH2, NMAX, GHA)                                    
        ENDIF 
C-- DETERMINE MAGNETIC DIPOL MOMENT AND COEFFIECIENTS G
        F0=0.D0
        DO 1234 J=1,3
           F = GHA(J) * 1.D-5
           F0 = F0 + F * F
1234       CONTINUE
        DIMO = DSQRT(F0)
        GHI1=GHA(1)                                         
        GHI2=GHA(2)                                         
        GHI3=GHA(3)

        GH1(1) =  0.0
        I=2          
        F0=1.D-5                
        IF(IS.EQ.0) F0=-F0 
        SQRT2=SQRT(2.)      

      DO 9 N=1,NMAX           
        X = N
        F0 = F0 * X * X / (4.D0 * X - 2.D0)               
        IF(IS.EQ.0) F0 = F0 * (2.D0 * X - 1.D0) / X
        F = F0 * 0.5D0                                    
        IF(IS.EQ.0) F = F * SQRT2
        GH1(I) = GHA(I-1) * F0
        I = I+1                                         
      DO 9 M=1,N                                    
        F = F * (X + M) / (X - M + 1.D0)                 
        IF(IS.EQ.0) F = F * DSQRT((X - M + 1.D0) / (X + M))             
        GH1(I) = GHA(I-1) * F
        GH1(I+1) = GHA(I) * F
        I=I+2
9     CONTINUE 
        RETURN
        END
C
C
        SUBROUTINE GETSHC (IU, FSPEC, NMAX, ERAD, GH, IER)                                                                                           
C ===============================================================               
C       Reads spherical harmonic coefficients from the specified     
C       file into an array.                                          
C       Input:                                                       
C           IU    - Logical unit number                              
C           FSPEC - File specification                               
C       Output:                                                      
C           NMAX  - Maximum degree and order of model                
C           ERAD  - Earth's radius associated with the spherical     
C                   harmonic coefficients, in the same units as      
C                   elevation                                        
C           GH    - Schmidt quasi-normal internal spherical          
C                   harmonic coefficients                            
C           IER   - Error number: =  0, no error                     
C                                 = -2, records out of order         
C                                 = FORTRAN run-time error number    
C ===============================================================               
                                                                                
        CHARACTER  FSPEC*(*), FOUT*80                                    
        DIMENSION       GH(196)
        LOGICAL		mess 
        COMMON/iounit/konsol,mess        
        do 1 j=1,196  
1          GH(j)=0.0

C ---------------------------------------------------------------               
C       Open coefficient file. Read past first header record.        
C       Read degree and order of model and Earth's radius.           
C ---------------------------------------------------------------               
        WRITE(FOUT,667) FSPEC
 667    FORMAT(A13)
c-web-for webversion
c 667    FORMAT('/var/www/omniweb/cgi/vitmo/IRI/',A13)
        OPEN (IU, FILE=FOUT, STATUS='OLD', IOSTAT=IER, ERR=999)     
        READ (IU, *, IOSTAT=IER, ERR=999)                            
        READ (IU, *, IOSTAT=IER, ERR=999) NMAX, ERAD, XMYEAR 
        nm=nmax*(nmax+2)                
        READ (IU, *, IOSTAT=IER, ERR=999) (GH(i),i=1,nm) 
        goto 888 
               
999     if (mess) write(konsol,100) FOUT
100     FORMAT('Error while reading ',A13)

888     CLOSE (IU)                                                                                                                                   
        RETURN                                                       
        END                                                          
C
C
        SUBROUTINE INTERSHC (DATE, DTE1, NMAX1, GH1, DTE2,          
     1                        NMAX2, GH2, NMAX, GH)                  
                                                                                
C ===============================================================               
C                                                                               
C       Version 1.01                                                 
C                                                                               
C       Interpolates linearly, in time, between two spherical        
C       harmonic models.                                             
C                                                                               
C       Input:                                                       
C           DATE  - Date of resulting model (in decimal year)        
C           DTE1  - Date of earlier model                            
C           NMAX1 - Maximum degree and order of earlier model        
C           GH1   - Schmidt quasi-normal internal spherical          
C                   harmonic coefficients of earlier model           
C           DTE2  - Date of later model                              
C           NMAX2 - Maximum degree and order of later model          
C           GH2   - Schmidt quasi-normal internal spherical          
C                   harmonic coefficients of later model             
C                                                                               
C       Output:                                                      
C           GH    - Coefficients of resulting model                  
C           NMAX  - Maximum degree and order of resulting model      
C                                                                               
C       A. Zunde                                                     
C       USGS, MS 964, Box 25046 Federal Center, Denver, CO  80225    
C                                                                               
C ===============================================================               
                                                                                
        DIMENSION       GH1(*), GH2(*), GH(*)                        
                                                                                
C ---------------------------------------------------------------               
C       The coefficients (GH) of the resulting model, at date        
C       DATE, are computed by linearly interpolating between the     
C       coefficients of the earlier model (GH1), at date DTE1,       
C       and those of the later model (GH2), at date DTE2. If one     
C       model is smaller than the other, the interpolation is        
C       performed with the missing coefficients assumed to be 0.     
C ---------------------------------------------------------------               
                                                                                
        FACTOR = (DATE - DTE1) / (DTE2 - DTE1)                       
                                                                                
        IF (NMAX1 .EQ. NMAX2) THEN                                   
            K = NMAX1 * (NMAX1 + 2)                                  
            NMAX = NMAX1                                             
        ELSE IF (NMAX1 .GT. NMAX2) THEN                              
            K = NMAX2 * (NMAX2 + 2)                                  
            L = NMAX1 * (NMAX1 + 2)                                  
            DO 1122 I = K + 1, L                                          
1122            GH(I) = GH1(I) + FACTOR * (-GH1(I))                  
            NMAX = NMAX1                                             
        ELSE                                                         
            K = NMAX1 * (NMAX1 + 2)                                  
            L = NMAX2 * (NMAX2 + 2)                                  
            DO 1133 I = K + 1, L                                          
1133            GH(I) = FACTOR * GH2(I)                              
            NMAX = NMAX2                                             
        ENDIF                                                        
                                                                                
        DO 1144 I = 1, K                                                  
1144        GH(I) = GH1(I) + FACTOR * (GH2(I) - GH1(I))              
                                                                                
        RETURN                                                       
        END                                                          
C
C
        SUBROUTINE EXTRASHC (DATE, DTE1, NMAX1, GH1, NMAX2,           
     1                        GH2, NMAX, GH)                                                                                                           
C ===============================================================               C                                                                               
C       Version 1.01                                                   C                                                                               
C       Extrapolates linearly a spherical harmonic model with a        
C       rate-of-change model.                                          
C                                                                               
C       Input:                                                         
C           DATE  - Date of resulting model (in decimal year)          
C           DTE1  - Date of base model                                 
C           NMAX1 - Maximum degree and order of base model             
C           GH1   - Schmidt quasi-normal internal spherical            
C                   harmonic coefficients of base model                
C           NMAX2 - Maximum degree and order of rate-of-change         
C                   model                                              
C           GH2   - Schmidt quasi-normal internal spherical            
C                   harmonic coefficients of rate-of-change model      
C                                                                               
C       Output:                                                        
C           GH    - Coefficients of resulting model                    
C           NMAX  - Maximum degree and order of resulting model        
C                                                                               
C       A. Zunde                                                       
C       USGS, MS 964, Box 25046 Federal Center, Denver, CO  80225      
C                                                                               
C ===============================================================               
                                                                                
        DIMENSION       GH1(*), GH2(*), GH(*)                        
                                                                                
C ---------------------------------------------------------------               
C       The coefficients (GH) of the resulting model, at date          
C       DATE, are computed by linearly extrapolating the coef-         
C       ficients of the base model (GH1), at date DTE1, using          
C       those of the rate-of-change model (GH2), at date DTE2. If      
C       one model is smaller than the other, the extrapolation is      
C       performed with the missing coefficients assumed to be 0.       
C ---------------------------------------------------------------               
                                                                                
        FACTOR = (DATE - DTE1)                                         
                                                                                
        IF (NMAX1 .EQ. NMAX2) THEN                                     
            K = NMAX1 * (NMAX1 + 2)                                    
            NMAX = NMAX1                                               
        ELSE IF (NMAX1 .GT. NMAX2) THEN                                
            K = NMAX2 * (NMAX2 + 2)                                    
            L = NMAX1 * (NMAX1 + 2)                                    
            DO 1155 I = K + 1, L                                            
1155            GH(I) = GH1(I)                                         
            NMAX = NMAX1                                               
        ELSE                                                           
            K = NMAX1 * (NMAX1 + 2)                                    
            L = NMAX2 * (NMAX2 + 2)                                    
            DO 1166 I = K + 1, L                                            
1166            GH(I) = FACTOR * GH2(I)                                
            NMAX = NMAX2                                               
        ENDIF                                                          
                                                                                
        DO 1177 I = 1, K                                                    
1177        GH(I) = GH1(I) + FACTOR * GH2(I)                           
                                                                                
        RETURN                                                         
        END                                                            
C
C
      SUBROUTINE GEODIP(IYR,SLA,SLO,DLA,DLO,J)
C ===============================================================               
C  Calculates geomagnetic dipole latitude/longitude (DLA/DLO) from 
C  geocentric latitude/longitude (SLA/SLO) for J=0 and vice versa  
C  for J=1.
C                     J=0           J=1
C		INPUT:     J,SLA,SLO     J,DLA,DLO
C		OUTPUT:     DLA,DLO       SLA,SLO

C  Last revision: November 2005 (Vladimir Papitashvili)
C  The code is modifed from GEOCOR written by V.Popov and V.Papitashvili
C  in mid-1980s. 
C ===============================================================               

         COMMON /CONST/UMR,PI 

C  Earth's radius (km) RE = 6371.2

C  The radius of the sphere to compute the coordinates (in Re)
C        RH = (RE + HI)/RE
         R = 1.

         if(j.gt.0) goto 1234
        
         COL = (90.- SLA)*UMR
         RLO = SLO*UMR
      CALL SPHCAR(R,COL,RLO,X,Y,Z,1)
      CALL GEOMAG(X,Y,Z,XM,YM,ZM,1,IYR)
      CALL SPHCAR(RM,TH,PF,XM,YM,ZM,-1)
         SZM = ZM
         DLO = PF/UMR
         DCO = TH/UMR
         DLA = 90.- DCO
         RETURN
          
1234     continue
      COL = (90.- DLA)*UMR
      RLO = DLO*UMR
      CALL SPHCAR(R,COL,RLO,XM,YM,ZM,1)
      CALL GEOMAG(X,Y,Z,XM,YM,ZM,-1,IYR)
      CALL SPHCAR(RM,TH,PF,X,Y,Z,-1)
        SZM = ZM
        SLO = PF/UMR
        SCO = TH/UMR
        SLA = 90.- SCO

      RETURN
      END

C 
C 
		function fmodip(xlat)
		
		common/findRLAT/xlong,year
		
      	call igrf_dip(xlat,xlong,year,300.,dec,dip,dipl,ymodip)
      	fmodip=ymodip

      	return
      	end
C
C
      SUBROUTINE GEOCGM01(ICOR,IYEAR,HI,DAT,PLA,PLO)
C  *********************************************************************
C  Converts geocentric latitude/longitude into corrected geomagnetic
C  (CGM) latitude/longitude using IGRF model.
C
C  Version 2011 for GEO-CGM.FOR    (good through 2015)      January 2011
C  Version 2005 for GEO-CGM.FOR    (good through 2010)     November 2005
C  Nov 11, 2005  IGRF and RECALC are is modified to the IGRF-10 model 
C                and extended back to 1900 using the DGRF coeffcients
C  Apr 11, 2001  GEOLOW is modified to account for interpolation of
C                CGM meridians near equator across the 360/0 boundary
C  AUTHORS:
C  Natalia E. Papitashvili (WDC-B2, Moscow, Russia, now at NSSDC,
C    NASA/Goddard Space Flight Center, Greenbelt, Maryland)
C  Vladimir O. Papitashvili (IZMIRAN, Moscow, Russia, now at SPRL,
C    University of Michigan, Ann Arbor)
C  Conributions from Boris A. Belov and Vladimir A. Popov (both at
C    IZMIRAN), Therese Moretto (DMI, DSRI, now at NSF), Freddy 
C    Christiansen (DMI, DSRI), and Scott Boardsen (NASA/GSFC).

C  The original version of this code is described in the brochure by
C  N.A. Tsyganenko, A.V. Usmanov, V.O. Papitashvili, N.E. Papitashvili,
C  and V.A. Popov, Software for computations of geomagnetic field and
C  related coordinate systems, Soviet Geophys. Committ., Moscow, 58 pp.,
C  1987. A number of subroutines from the revised GEOPACK-96 software
C  package developed by Nikolai A. Tsyganenko and Mauricio Peredo are
C  utilized in this code with some modifications (see full versions of
C  GEOPACK packages on http://www-spof.gsfc.nasa.gov/Modeling/geopack.html).

C  This code consists of the main subroutine GEOCGM01, five functions
C  (OVL_ANG, CGMGLA, CGMGLO, DFRIDR, and AZM_ANG), eigth new and revised
C  subroutines from the above-mentioned brochure (MLTUT, MFC, FTPRNT,
C  GEOLOW, CORGEO, GEOCOR, SHAG, and RIGHT), and 9 subroutines from
C  GEOPACK-96 (IGRF, SPHCAR, BSPCAR, GEOMAG, MAGSM, SMGSM, RECALC, SUN)

C  =====================================================================

C  Input parameters:
C     ICOR = +1    geo to cgm
C            -1    cgm to geo
C     IYEAR= year
C     HI   = altitude in km
C  Input/Output parameters:
C     DAT(1,i)=slar geocentric latitude (input/output if icor=+1/-1)
C     DAT(2,i)=slor geocentric longitude (input/output if icor=+1/-1)
C     DAT(3,i)=clar CGM latitude (input/output if icor=-1/+1)
C     DAT(4,i)=clor CGM longitude (input/output if icor=-1/+1)
C  Output parameters:
C     DAT(5,i)=rbm apex of the magnetic field line in Re (Re=6371.2 km)
C            (this parameter approximately equals the McIlwain L-value)
C     DAT(6,i)=btr IGRF Magnetic field H (nT)
C     DAT(7,i)=bfr IGRF Magnetic field D (deg)
C     DAT(8,i)=brr IGRF Magnetic field Z 
C     DAT(9,i)=ovl oval_angle as the azimuth to "magnetic north":
C                + east in Northern Hemisphere
C                + west in Southern Hemisphere
C     DAT(10,i)=azm meridian_angle as the azimuth to the CGM pole:
C                + east in Northern Hemisphere
C                + west in Southern Hemisphere
C     DAT(11,i)=utm magnetic local time (MLT) midnight in UT hours
C     		 i=1	for the start point
C     		 i=2	for the conjugate point of the start point (slac, sloc)
C		 i=3    for the footprint at 1-Re of the start point (slaf,slof)
C		 i=4    for the conjugate footprint at 1-Re of the start point
C     PLA(1)	geocentric latitude of the CGM pole in the Northern hemisphere
C     PLO(1)	geocentric longitude of the CGM pole in the Northern hemisphere
C     PLA(2)	geocentric latitude of the CGM pole in the Southern hemisphere
C     PLO(2)	geocentric longitude of the CGM pole in the Southern hemisphere
C     PLA(3)	geoce lati CGM North pole at the Earth's surface 1-Re or zero alt.
C     PLO(3)	geoce long CGM North pole at the Earth's surface 1-Re or zero alt.
C     PLA(4)	geoce lati CGM South pole at the Earth's surface 1-Re or zero alt.
C     PLO(4)	geoce long CGM South pole at the Earth's surface 1-Re or zero alt.
C
C In program:
C     dla  = dipole latitude
C     dlo  = dipole longitude

C  =====================================================================

c      COMMON /C1/ AA(27),II(2),BB(8)
      COMMON /IYR/ IYR
      COMMON /NM/ NM
c      COMMON /RZ/ RH

      DIMENSION DAT(11,4),PLA(4),PLO(4)
      CHARACTER STR*12

C  Year (for example, as for Epoch 1995.0 - no fraction of the year)

       IYR = iyear

C  Earth's radius (km)

        RE = 6371.2

C  NM is the number of harmonics

        NM = 10

C  The radius of the sphere to compute the coordinates (in Re)

        RH = (RE + HI)/RE

C  Correction of latitudes and longitudes if they are entered beyond of
C  the limits (this actually does not affect coordinate calculations
C  but the oval/meridian angles and MLT midnight cannot be computed)

          IF (DAT(1,1).GT. 90.) DAT(1,1) =  180. - DAT(1,1)
          IF (DAT(1,1).LT.-90.) DAT(1,1) = -180. - DAT(1,1)
          IF (DAT(3,1).GT. 90.) DAT(3,1) =  180. - DAT(3,1)
          IF (DAT(3,1).LT.-90.) DAT(3,1) = -180. - DAT(3,1)

          IF (DAT(2,1).GT. 360.) DAT(2,1) = DAT(2,1) - 360.
          IF (DAT(2,1).LT.-360.) DAT(2,1) = DAT(2,1) + 360.
          IF (DAT(4,1).GT. 360.) DAT(4,1) = DAT(4,1) - 360.
          IF (DAT(4,1).LT.-360.) DAT(4,1) = DAT(4,1) + 360.

C  Computation of CGM coordinates from geocentric ones at high- and
C  middle latitudes

      IF (ICOR.EQ. 1) THEN

         SLAR = DAT(1,1)
         SLOR = DAT(2,1)
         IF (ABS(SLAR).EQ.90.) SLOR = 360.
         CALL GEOCOR(SLAR,SLOR,RH,DLA,DLO,CLAR,CLOR,PMR)
         DAT(3,1) = CLAR
         DAT(4,1) = CLOR

      ELSE

C  Computation of geocentric coordinates from CGM ones at high- and
C  middle latitudes

         CLAR = DAT(3,1)
         CLOR = DAT(4,1)
         IF (ABS(CLAR).EQ.90.) CLOR = 360.
         CALL CORGEO(SLAR,SLOR,RH,DLA,DLO,CLAR,CLOR,PMR)
         DAT(1,1) = SLAR
         DAT(2,1) = SLOR

      ENDIF

C  PMI is L-shell parameter for the magnetic field line; limit to 16 Re

        IF(PMR.GE.16.) PMR = 999.99
        DAT(5,1) = PMR

C  Check if CGM_Lat has been calculated, then go for the conjugate point

        IF(CLAR.GT.999.) THEN

C  CGM_Lat has NOT been calculated, call GEOLOW for computation of the
C  CGM coordinates at low latitudes using the CBM approach (see the
C  reference in GEOLOW)

           CALL GEOLOW(SLAR,SLOR,RH,CLAR,CLOR,RBM,SLAC,SLOC)
           DAT(3,1) = CLAR
           DAT(4,1) = CLOR
           IF(RBM.GE.16.) RBM = 999.99
           DAT(5,1) = RBM

C  Conjugate point coordinates at low latitudes

           WRITE(STR,'(2F6.2)') SLAC,SLOC
           READ (STR,'(2F6.2)') SLAC,SLOC
           DAT(1,2) = SLAC
           DAT(2,2) = SLOC
           CALL GEOCOR(SLAC,SLOC,RH,DAA,DOO,CLAC,CLOC,RBM)
           IF(CLAC.GT.999.)
     +       CALL GEOLOW(SLAC,SLOC,RH,CLAC,CLOC,RBM,SLAL,SLOL)
           DAT(3,2) = CLAC
           DAT(4,2) = CLOC
           DAT(5,2) = RBM

       ELSE

C  Computation of the magnetically conjugated point at high- and
C  middle latitudes

           CLAC = -CLAR
           CLOC =  CLOR
           DAT(3,2) = CLAC
           DAT(4,2) = CLOC
           CALL CORGEO(SLAC,SLOC,RH,DAA,DOO,CLAC,CLOC,PMC)
           DAT(1,2) = SLAC
           DAT(2,2) = SLOC
           IF(PMC.GE.16.) PMC = 999.99
           DAT(5,2) = PMC

      ENDIF

C  Same RBM for footprints as for the starting and conjugate points

            DAT(5,3) = DAT(5,1)
            DAT(5,4) = DAT(5,2)

C  Calculation of the magnetic field line footprint at the
C  Earth's surface for the starting point

      IF(RH.GT.1..and.CLAR.LT.999..and.CLAR.LT.999.) THEN
        CALL FTPRNT(RH,SLAR,SLOR,CLAR,CLOR,ACLAR,ACLOR,SLARF,SLORF,1.)
            DAT(1,3) = SLARF
            DAT(2,3) = SLORF
            DAT(3,3) = ACLAR
            DAT(4,3) = ACLOR
C  and for the conjugate point
        CALL FTPRNT(RH,SLAC,SLOC,CLAC,CLOC,ACLAC,ACLOC,SLACF,SLOCF,1.)
            DAT(1,4) = SLACF
            DAT(2,4) = SLOCF
            DAT(3,4) = ACLAC
            DAT(4,4) = ACLOC
                                                     ELSE
        do i = 1,4
          do j = 3,4
            DAT(i,j) = 999.99
          enddo
        enddo

      ENDIF

C  Computation of geocentric coordinates of the North or South CGM
C  poles for a given year at the altitude RH and Earth's surface (1-Re)

        CALL CORGEO(PLAN,PLON,RH,DAA,DOO, 90.,360.,PMP)
            PLAN1 = PLAN
            PLON1 = PLON

        CALL CORGEO(PLAS,PLOS,RH,DAA,DOO,-90.,360.,PMP)
            PLAS1 = PLAS
            PLOS1 = PLOS

        IF(RH.GT.1.) THEN
          CALL CORGEO(PLAN1,PLON1,1.,DAA,DOO, 90.,360.,PMP)
          CALL CORGEO(PLAS1,PLOS1,1.,DAA,DOO,-90.,360.,PMM)
        ENDIF

         IF(CLAR.LT.0.) THEN
           PLA(1) = PLAS
           PLO(1) = PLOS
                        ELSE
           PLA(1) = PLAN
           PLO(1) = PLON
         ENDIF
         IF(ACLAR.LT.0.) THEN
           PLA(3) = PLAS1
           PLO(3) = PLOS1
                        ELSE
           PLA(3) = PLAN1
           PLO(3) = PLON1
         ENDIF
         IF(CLAC.LT.0.) THEN
           PLA(2) = PLAS
           PLO(2) = PLOS
                        ELSE
           PLA(2) = PLAN
           PLO(2) = PLON
         ENDIF
         IF(ACLAC.LT.0.) THEN
           PLA(4) = PLAS1
           PLO(4) = PLOS1
                         ELSE
           PLA(4) = PLAN1
           PLO(4) = PLON1
         ENDIF

      do j = 1,4
        DAT( 6,j) = 99999.
        DAT( 7,j) = 999.99
        DAT( 8,j) = 99999.
        DAT( 9,j) = 999.99
        DAT(10,j) = 999.99
        DAT(11,j) =  99.99
      enddo

      icount = 2
      if(RH.gt.1.) icount = 4
          RJ = RH
      do j = 1,icount
        if(j.gt.2) RJ = 1.

        PLAJ = PLA(j)
        PLOJ = PLO(j)

        SLAJ = DAT(1,j)
        SLOJ = DAT(2,j)
        CLAJ = DAT(3,j)
        CLOJ = DAT(4,j)

C  Computation of the IGRF components
        CALL MFC(SLAJ,SLOJ,RJ,BTR,BFR,BRR)
          DAT(6,j) = BTR
          DAT(7,j) = BFR
          DAT(8,j) = BRR

C  Computation of the oval_angle (OVL) between the tangents to
C  geographic and CGM latitudes at a given point (the code is slightly
C  modified from the source provided by Therese Morreto in 1994). Note
C  that rotation of OVL on 90 deg anticlockwise provides the azimuth
C  to the local "magnetic" north (south) measured from the local
C  geographic meridian. The OVL_ANG can be calculated only at middle
C  and high latitudes where CGM --> GEO is permitted.

        OVL = OVL_ANG(SLAJ,SLOJ,CLAJ,CLOJ,RJ)
          DAT(9,j) = OVL

C  Computation of the meridian_angle (AZM) between the geographic
C  meridian and direction (azimuth along the great-circle arc) to
C  the North (South) CGM pole

        AZM = AZM_ANG(SLAJ,SLOJ,CLAJ,PLAJ,PLOJ)
          DAT(10,j) = AZM

C  Computation of the MLT midnight (in UT)
        CALL MLTUT(SLAJ,SLOJ,CLAJ,PLAJ,PLOJ,UT)
          DAT(11,j) = UT

C  End of loop j = 1,icount
      enddo

      RETURN
      END
C
C
      real function OVL_ANG(sla,slo,cla,clo,rr)
C  *********************************************************************
C  This function returns an estimate at the given location of the angle
C  (oval_angle) between the directions (tangents) along the constant
C  CGM and geographic latitudes by utilizing the function DFRIDR from
C  Numerical Recipes for FORTRAN.

C  This angle can be taken as the azimuth to the local "magnetic" north
C  (south) if the eastward (westward) tangent to the local CGM latitude
C  points south (north) from the local geographic latitude.

C  Written by Therese Moretto in August 1994 (revised by V. Papitashvili
C  in January 1999).
C  *********************************************************************

      real cgmgla,cgmglo,dfridr
      logical cr360,cr0

      external cgmgla,cgmglo,dfridr

      common/cgmgeo/clat,cr360,cr0,rh

C  Ignore points which nearly coincide with the geographic or CGM poles
C  within 0.01 degree in latitudes; this also takes care if SLA or CLA
C  are dummy values (e.g., 999.99)

      if(abs(sla).ge.89.99.or.abs(cla).ge.89.99.or.
     +   abs(sla).lt.30.) then
        OVL_ANG = 999.99
        return
      endif

C  Initialize values for the cgmglo and cgmgla functions

	    rh = rr
        clat = cla
       cr360 = .false.
         cr0 = .false.

C  Judge if SLO may be crossing the 360-0 limit. If geocentric
C  longitude of the location is larger than 270 deg, then cr360 is
C  set "true"; if it is less than 90 deg, then cr0 is set "true".

       if(slo.ge.270.) cr360 = .true.
       if(slo.le. 90.)   cr0 = .true.

C  An initial stepsize (in degrees)

       step = 10.

C  Note that in the near-pole region the functions CGMGLA and CGMGLO
C  could be called from DFRIDR with the CGM latitudes exceeded 90 or
C  -90 degrees (e.g., 98 or -98) when STEP is added or subtracted to a
C  given CGM latitude (CLA). This does not produce discontinuities in
C  the functions because GEOCOR calculates GEOLAT smoothly for the
C  points lying behind the pole (e.g., as for 82 or - 82 deg. in the
C  above-mentioned example). However, it could be discontinuity in
C  GEOLON if |GEOLAT| = 90 deg. - see CGMGLO for details.

           hom = dfridr(cgmgla,clo,step,err1)

         denom = dfridr(cgmglo,clo,step,err2)

         denom = denom*cos(sla*0.017453293)

       OVL_ANG = -atan2(hom,denom)

       OVL_ANG = OVL_ANG*57.2957751

      return
      end
C
C
      real function cgmgla(clon)
C  *********************************************************************
C  This function returns the geocentric latitude as a function of CGM
C  longitude with the CGM latitude held in common block CGMGEO.
C  Essentially this function just calls the subroutine CORGEO.
C  *********************************************************************

      logical cr360,cr0
      common/cgmgeo/cclat,cr360,cr0,rh

	    rr = rh
       if(clon.gt.360.) clon = clon - 360.
         if(clon.lt.0.) clon = clon + 360.
       call CORGEO(geolat,geolon,rr,dla,dlo,cclat,clon,pmi)
         cgmgla = geolat

      return
      end
C
C
      real function cgmglo(clon)
C *********************************************************************
C  Same as the function CGMGLA but this returns the geocentric
C  longitude. If cr360 is true, geolon+360 deg is returned when geolon
C  is less than 90 deg. If cr0 is true, geolon-360 deg is returned
C  when geolon is larger than 270 degrees.
C *********************************************************************

      logical cr360,cr0

      common/cgmgeo/cclat,cr360,cr0,rh

          rr = rh
       if(clon.gt.360.) clon = clon - 360.
         if(clon.lt.0.) clon = clon + 360.
   1   continue
       call CORGEO(geolat,geolon,rr,dla,dlo,cclat,clon,pmi)

C  Geographic longitude geolon could be any number (e.g., discontinued)
C  when geolat is the geographic pole

	 if(abs(geolat).ge.89.99) then
	       clon = clon - 0.01
	       goto 1
	 endif

       if(cr360.and.(geolon.le.90.)) then
           cgmglo = geolon + 360.
                                     else
	   if (cr0.and.(geolon.ge.270.)) then
           cgmglo = geolon - 360.
                                       else
           cgmglo = geolon
         endif
	 endif

      return
      end
C
C
      FUNCTION DFRIDR(func,x,h,err)
C **********************************************************************
C  Numerical Recipes Fortran 77 Version 2.07
C  Copyright (c) 1986-1995 by Numerical Recipes Software
C **********************************************************************

      INTEGER NTAB
      REAL dfridr,err,h,x,func,CON,CON2,BIG,SAFE
      LOGICAL mess
      PARAMETER (CON=1.4,CON2=CON*CON,BIG=1.E30,NTAB=10,SAFE=2.)
      EXTERNAL func

        COMMON/iounit/konsol,mess        

      INTEGER i,j
      REAL errt,fac,hh,a(NTAB,NTAB)
       if(h.eq.0.) then
          if (mess) write(konsol,100) 
100       FORMAT('h must be nonzero in dfridr')
          return
          endif
       hh = h
       a(1,1) = (func(x+hh)-func(x-hh))/(2.0*hh)
       err = BIG
      do 12 i=2,NTAB
        hh = hh/CON
        a(1,i) = (func(x+hh)-func(x-hh))/(2.0*hh)
        fac = CON2
        do 11 j=2,i
          a(j,i) = (a(j-1,i)*fac-a(j-1,i-1))/(fac-1.)
          fac = CON2*fac
          errt = max(abs(a(j,i)-a(j-1,i)),abs(a(j,i)-a(j-1,i-1)))
          if (errt.le.err) then
            err = errt
            dfridr = a(j,i)
          endif
  11    continue
         if(abs(a(i,i)-a(i-1,i-1)).ge.SAFE*err) return
  12   continue

      return
      END
C
C
      real function AZM_ANG(sla,slo,cla,pla,plo)
C  *********************************************************************
C  Computation of an angle between the north geographic meridian and
C  direction to the North (South) CGM pole: positive azimuth is
C  measured East (West) from geographic meridian, i.e., the angle is
C  measured between the great-circle arc directions to the geographic
C  and CGM poles. In this case the geomagnetic field components in
C  XYZ (NEV) system can be converted into the CGM system in both
C  hemispheres as:
C                           XM = X cos(alf) + Y sin(alf)
C                           YM =-X sin(alf) + Y cos(alf)

C  Written by V. O. Papitashvili in mid-1980s; revised in February 1999

C  Ignore points which nearly coincide with the geographic or CGM poles
C  within 0.01 degree in latitudes; this also takes care if SLA or CLA
C  are dummy values (e.g., 999.99)
C  *********************************************************************

      if(abs(sla).ge.89.99.or.abs(cla).ge.89.99) then
        AZM_ANG = 999.99
        return
      endif
          sp = 1.
          ss = 1.
      if(sign(sp,pla).ne.sign(ss,cla)) then
        write(7,2) pla,cla
   2    format(/
     +  'WARNING - The CGM pole PLA = ',f6.2,' and station CLAT = ',
     +  f6.2,' are not in the same hemisphere: AZM_ANG is incorrect!')
      endif

      RAD = 0.017453293

           am = (90. - abs(pla))*rad
        if(sign(sp,pla).eq.sign(ss,sla)) then
           cm = (90. - abs(sla))*rad
                                          else
           cm = (90. + abs(sla))*rad
        endif
        if(sla.ge.0.) then
          bet = (plo - slo)*rad
                     else
          bet = (slo - plo)*rad
        endif
           sb = sin(bet)
           st = sin(cm)/tan(am) - cos(cm)*cos(bet)
         alfa = atan2(sb,st)
         AZM_ANG = alfa/rad

      RETURN
      END
C
C
      SUBROUTINE MLTUT(SLA,SLO,CLA,PLA,PLO,UT)
C  *********************************************************************
C  Calculates the MLT midnight in UT hours
C  Definition of the MLT midnight (MLTMN) here is different from the
C  approach described elsewhere. This definition does not take into
C  account the geomagnetic meridian of the subsolar point which causes
C  seasonal variations of the MLTMN in UT time. The latter approach is
C  perfectly applicable to the dipole or eccentric dipole magnetic
C  coordinates but it fails with the CGM coordinates because there are
C  forbidden areas near the geomagnetic equator where CGM coordinates
C  cannot be calculated by definition [e.g., Gustafsson et al., JATP,
C  54, 1609, 1992].
C  In this code the MLT midnight is defined as location of a given point
C  on (or above) the Earth's surface strictly behind the North (South)
C  CGM pole in such the Sun, the pole, and the point are lined up.
C  This approach was originally proposed and coded by Boris Belov
C  sometime in the beginning of 1980s; here it is slightly edited by
C  Vladimir Papitashvili in February 1999.
C  Ignore points which nearly coincide with the geographic or CGM poles
C  within 0.01 degree in latitudes; this also takes care if SLA or CLA
C  are dummy values (e.g., 999.99)
C  *********************************************************************

      if(abs(sla).ge.89.99.or.abs(cla).ge.89.99) then
        UT = 99.99
        return
      endif

      TPI = 6.283185307
      RAD = 0.017453293
       sp = 1.
       ss = 1.
      if(sign(sp,pla).ne.sign(ss,cla)) then
        write(7,2) pla,cla
   2    format(/
     +  'WARNING - The CGM pole PLA = ',f6.2,' and station CLAT = ',
     +  f6.2,' are not in the same hemisphere: MLTMN is incorrect!')
      endif

C  Solve the spherical triangle

         QQ = PLO*RAD
        CFF = 90. - abs(PLA)
        CFF = CFF*RAD
      IF(CFF.LT.0.0000001) CFF=0.0000001

      if(sign(sp,pla).eq.sign(ss,sla)) then
        CFT = 90. - abs(SLA)
                                       else
        CFT = 90. + abs(SLA)
      endif

          CFT = CFT*RAD
      IF(CFT.LT.0.0000001) CFT=0.0000001

        QT = SLO*RAD
         A = SIN(CFF)/SIN(CFT)
         Y = A*SIN(QQ) - SIN(QT)
         X = COS(QT) - A*COS(QQ)
        UT = ATAN2(Y,X)

        IF(UT.LT.0.) UT = UT + TPI
       QQU = QQ + UT
       QTU = QT + UT
        BP = SIN(CFF)*COS(QQU)
        BT = SIN(CFT)*COS(QTU)
        UT = UT/RAD
        UT = UT/15.
      IF(BP.LT.BT) GOTO 10

        IF(UT.LT.12.) UT = UT + 12.
      IF(UT.GT.12.) UT = UT - 12.

  10  CONTINUE

      RETURN
      END
C
C
        SUBROUTINE MFC(SLA,SLO,R,H,D,Z)
C  *********************************************************************
C  Computation of the IGRF magnetic field components
C  Extracted as a subroutine from the earlier version of GEO-CGM.FOR
C  V. Papitashvili, February 1999
C  *********************************************************************

      COMMON /NM/NM
      COMMON /IYR/IYR

C  This takes care if SLA or CLA are dummy values (e.g., 999.99)

      if(sla.ge.999.) then
          X = 99999.
          Y = 99999.
          Z = 99999.
          H = 99999.
          D = 999.99
          I = 999.99
          F = 99999.
        return
      endif

C  Computation of all geomagnetic field components
        RLA = (90.-SLA)*0.017453293
        RLO = SLO*0.017453293
       CALL IGRF(IYR,NM,R,RLA,RLO,BR,BT,BF)
          X = -BT
          Y =  BF
          Z = -BR
          H = SQRT(X**2+Y**2)
          D = 57.2957751*ATAN2(Y,X)
          I = 57.2957751*ATAN2(Z,H)
          F = SQRT(H**2+Z**2)
        RETURN
        END
C
C
      SUBROUTINE FTPRNT(RH,SLA,SLO,CLA,CLO,ACLA,ACLO,SLAF,SLOF,RF)
C  *********************************************************************
C  Calculation of the magnetic field line footprint at the Earth's
C  (or any higher) surface.
C  Extracted as a subroutine from the earlier version of GEO-CGM.FOR by
C  V. Papitashvili in February 1999 but then the subroutine was revised
C  to obtain the Altitude Adjusted CGM coordinates. The AACGM approach
C  is proposed by Kile Baker of the JHU/APL, see their World Wide Web
C  site http://sd-www.jhuapl.edu/RADAR/AACGM/ for details.
C  If RF = 1-Re (i.e., at the Earth's surface), then the footprint
C  location is defined as the Altitude Adjusted (AA) CGM coordinates
C  for a given point (ACLA, ACLO).
C
C  If RF = 1.xx Re (i.e., at any altitude above or below the starting
C  point), then the conjunction between these two points can be found
C  along the field line.
C  *********************************************************************

      COMMON /NM/NM
      COMMON /IYR/IYR

C  This takes care if SLA or CLA are dummy values (e.g., 999.99)

      if(sla.gt.999..or.cla.gt.999.or.RF.eq.RH) then
        ACLA = 999.99
        ACLO = 999.99
        SLAF = 999.99
        SLOF = 999.99
        return
      endif

C  Defining the Altitude Adjusted CGM coordinates for a given point

        COL = (90. - CLA)*0.017453293
        SN2 = (SIN(COL))**2
          DECARG=SQRT((SN2*RF)/RH)
          IF(ABS(DECARG).GT.1.) DECARG=SIGN(1.,DECARG)
        ACOL = ASIN(DECARG)
        ACLA = 90. - ACOL*57.29577951
        IF(CLA.LT.0.) ACLA = -ACLA
        ACLO = CLO

        CALL CORGEO(SLAF,SLOF,RF,DLAF,DLOF,ACLA,ACLO,PMIF)

        IF(SLAF.LT.999.) RETURN

C  Tracing the magnetic field line down to the Earth's surface at low
C  latitudes if CORGEO failed to calculate geocentric coordinates SLAF
C  and SLOF

        IF(SN2.LT.0.0000001) SN2 = 0.0000001
          RL = RH/SN2
        FRAC = 0.03/(1.+3./(RL-0.6))

C  Checking direction of the magnetic field-line, so the step along
C  the field-line will go down, to the Earth surface

        IF(CLA.GE.0.) FRAC = -FRAC
          DS = RH*FRAC

  250   CONTINUE

C  Start from an initial point

           R = RH
        RSLA = (90. - SLA)*0.0174533
        RSLO = SLO*0.0174533
        CALL SPHCAR(R,RSLA,RSLO,XF,YF,ZF,1)
         RF1 = R
         XF1 = XF
         YF1 = YF
         ZF1 = ZF

  255   CALL SHAG(XF,YF,ZF,DS)
          RR = SQRT(XF**2+YF**2+ZF**2)
          IF (RR.GT.RH) THEN
            DS = -DS
            XF = XF1
            YF = YF1
            ZF = ZF1
              GOTO 250
            ENDIF
         IF (RR.GT.RF) THEN
                 RF1 = RR
                 XF1 = XF
                 YF1 = YF
                 ZF1 = ZF
                 GOTO 255
                       ELSE
            DR1 = ABS(RF1 - RF)
            DR0 = ABS( RF - RR)
           DR10 = DR1 + DR0
              IF(DR10.NE.0.) THEN
                 DS = DS*(DR1/DR10)
                 CALL SHAG(XF1,YF1,ZF1,DS)
              ENDIF
           CALL SPHCAR(RR,SLAF,SLOF,XF1,YF1,ZF1,-1)
            SLAF = 90. - SLAF*57.29578
            SLOF = SLOF*57.29578
         ENDIF

      RETURN
      END
C
C
      SUBROUTINE GEOLOW(SLAR,SLOR,RH,CLAR,CLOR,RBM,SLAC,SLOC)
C  *********************************************************************
C  Calculates CGM coordinates from geocentric ones at low latitudes
C  where the DGRF/IGRF magnetic field lines may never cross the dipole
C  equatorial plane and, therefore, the definition of CGM coordinates
C  becomes invalid.
c
C  The code is written by Natalia and Vladimir Papitashvili as a part
C  of the earlier versions of GEO-CGM.FOR; extracted as a subroutine by
C  V. Papitashvili in February 1999.
c
C  Apr 11, 2001  GEOLOW is modified to account for interpolation of
C                CGM meridians near equator across the 360/0 boundary
c
C  See the paper by  Gustafsson, G., N. E. Papitashvili, and V. O.
C  Papitashvili, A revised corrected geomagnetic coordinate system for
C  Epochs 1985 and 1990 [J. Atmos. Terr. Phys., 54, 1609-1631, 1992]
C  for detailed description of the B-min approach utilized here.
C  *********************************************************************

      COMMON /NM/NM
      COMMON /IYR/IYR

      DIMENSION BC(2),ARLAT(181),ARLON(181)
      REAL*8 BM,B2,B3

C  This takes care if SLA is a dummy value (e.g., 999.99)

      if(slar.gt.999.) then
        CLAR = 999.99
        CLOR = 999.99
        SLAC = 999.99
        SLOC = 999.99
         RBM = 999.99
        return
      endif

C  HH is an error (nT) to determine B-min along the magnetic field line

       DHH = 0.5

C  Filling the work arrays of CGM latitudes and longitudes with 999.99
C  Note that at certain geocentric longitudes in the very near-equator
C  region no "geomagnetic equator" can be defined at all.

          DO J=61,121
            ARLAT(J) = 999.99
            ARLON(J) = 999.99
          ENDDO

        SLO = SLOR

           NDIR=0

C  Finding the geomagnetic equator as a projection of the B-min point
C  found for the field lines started from the last latitude in each
C  hemisphere where the CGM coordinates were obtained from geocentric
C  ones (GEO --> CGM). First the CGM coordinates are calculated in the
C  Northern (NDIR=0) and then in the Southern hemispheres (NDIR=1)

  53     IF(NDIR.EQ.0) THEN

C  Program works from 30 deg. latitude down to the geographic equator
C  in the Northern Hemisphere

             DO JC = 61,91
               SLA = 90.-(JC-1)
               CALL GEOCOR(SLA,SLO,RH,DAA,DOO,CLA,CLO,PMM)
               IF(CLA.GT.999.) THEN
                 NDIR=1
                 GOTO 53
               ENDIF
               ARLAT(JC) = CLA
               ARLON(JC) = CLO
             ENDDO
           NDIR=1
         GOTO 53

                       ELSE

C  Program works from -30 deg. latitude down to the geographic equator
C  in the Southern Hemisphere

             DO JC = 121,92,-1
               SLA = 90.-(JC-1)
               CALL GEOCOR(SLA,SLO,RH,DAA,DOO,CLA,CLO,PMM)
               IF(CLA.GT.999.) THEN
                 NDIR=0
                 GOTO 57
               ENDIF
               ARLAT(JC) = CLA
               ARLON(JC) = CLO
             ENDDO
           NDIR=0
         ENDIF

  57   CONTINUE

C  Finding last geographic latitudes along SLO where CGM coordinates
C  can be calculated

         n999=0
         ndir=0
         do jc = 61,121
           if(arlat(jc).gt.999.) then
             if(ndir.eq.0) then
                 jcn = jc - 1
               rnlat = arlat(jcn)
               rnlon = arlon(jcn)
                ndir = 1
                n999 = 1
             endif
           endif
           if(arlat(jc).lt.999.) then
             if(ndir.eq.1) then
                 jcs = jc
               rslat = arlat(jc)
               rslon = arlon(jc)
                ndir = 0
                goto 59
             endif
           endif
         enddo
 59     continue

C  If there is no points with 999.99 found along the SLO meridian,
C  then the IHEM loop will start from 3; otherwise it starts from 1

            if(n999.eq.0) then
              ih = 3
              goto 31
                          else
              ih = 1
            endif

C  Interpolation of the appropriate CGM longitudes between last
C  geocentric latitudes along SLO where CGM coordinates were defined
C (modified by Freddy Christiansen of DMI to account for interpolation
C  across the 360/0 boundary - April 11, 2001)

          rdel = jcs - jcn
          if(rdel.eq.0.) then
             delon = 0.
                         else
            if(rslon.gt.270..and.rnlon.lt.90.) then
                delon = (rslon - (rnlon + 360.))/rdel
            else
		    if(rslon.lt.90..and.rnlon.gt.270.) then
                delon = (rslon - (rnlon - 360.))/rdel
              else
                delon = (rslon - rnlon)/rdel
			endif
            endif
          endif
            do jc = jcn+1,jcs-1
              arlon(jc) = rnlon + delon*(jc-jcn)
	        if (arlon(jc).lt.0.) arlon(jc) = arlon(jc) + 360.
            enddo

   31   continue

C  Finding the CGM equator at SLO on the sphere with radius RH

        NOBM = 0
        do ihem = ih,3
           RM = RH

C  Defining the real equator point from the Northern Hemisphere

           if(ihem.eq.1) then
              CLA = rnlat
              SLA = 90. - (jcn - 1.)
              SLAN = SLA
              endif

C  Defining the real equator point from the Southern Hemisphere

           if(ihem.eq.2) then
              CLA = rslat
              SLA = 90. - (jcs - 1)
              SLAS = SLA
              endif

C  Defining the apex of the current magnetic field line

           if(ihem.eq.3) then
              CLA = 0.
              SLA = SLAR
              endif

C  Here CLA is used only to calculate FRAC

           COL = (90. - CLA)*0.017453293
           SLM = (90. - SLA)*0.017453293
           SLL = SLO*0.017453293
           CALL IGRF(IYR,NM,RM,SLM,SLL,BR,BT,BF)
           SZ = -BR
           CALL SPHCAR(RM,SLM,SLL,XGEO,YGEO,ZGEO,1)
           BM = SQRT(BR*BR + BT*BT + BF*BF)
           XBM = XGEO
           YBM = YGEO
           ZBM = ZGEO

           RL = 1./(SIN(COL))**2
           FRAC = 0.03/(1. + 3./(RL - 0.6))
           IF(SZ.LE.0.) FRAC = -FRAC
           DSD = RL*FRAC
           DS = DSD

    5      CONTINUE

C  Keep two consequently computed points to define B-min

           DO 7 I = 1,2
              DD = DS
              CALL SHAG(XGEO,YGEO,ZGEO,DD)
   11         IF(I.NE.1) GOTO 9
              XBM1 = XGEO
              YBM1 = YGEO
              ZBM1 = ZGEO
              RBM1 = SQRT(XBM1**2 + YBM1**2 + ZBM1**2)
    9         CONTINUE
              CALL SPHCAR(RM,SLM,SLL,XGEO,YGEO,ZGEO,-1)
              CALL IGRF(IYR,NM,RM,SLM,SLL,BR,BT,BF)

C  Go and compute the conjugate point if no B-min was found at this
C  magnetic field line (could happen at very near geomagnetic equator)

              if(RM.LT.RH) then
                 NOBM = 1
                 GOTO 77
                 endif
              BC(I) = SQRT(BR*BR + BT*BT + BF*BF)
    7      CONTINUE

           B2 = BC(1)
           B3 = BC(2)
           IF(BM.GT.B2.AND.B2.LT.B3) GO TO 15
           IF(BM.GE.B2.AND.B2.LT.B3) GO TO 17
           IF(BM.GT.B2.AND.B2.LE.B3) GO TO 17
           BM = BC(1)
           XGEO = XBM1
           YGEO = YBM1
           ZGEO = ZBM1
           XBM = XBM1
           YBM = YBM1
           ZBM = ZBM1
           GOTO 5
   15      BB3 = ABS(B3 - B2)
           BB2 = ABS(BM - B2)
           IF(BB2.LT.DHH.AND.BB3.LT.DHH) GO TO 21
   17      BM = BM
           XGEO = XBM
           YGEO = YBM
           ZGEO = ZBM
           DS = DS/2.
           GOTO 5

   21      CONTINUE

           CALL SPHCAR(RBM1,RLA,RLO,XBM1,YBM1,ZBM1,-1)
           RLA = 90. - RLA*57.2957751
           RLO = RLO*57.2957751

           if(ihem.eq.1) rlan = rla
           if(ihem.eq.2) rlas = rla

C  Computation of the magnetically conjugate point at low latitudes

   54      continue
           if(ihem.eq.3) then
              RBM = RBM1
              RM = RBM
              DS = DSD
   55         continue
              CALL SHAG(XBM1,YBM1,ZBM1,DS)
              RR = SQRT(XBM1**2 + YBM1**2 + ZBM1**2)
              IF (RR.GT.RH) THEN
                 R1 = RR
                 X1 = XBM1
                 Y1 = YBM1
                 Z1 = ZBM1
                 GOTO 55
              ELSE
                 DR1 = ABS(RH - R1)
                 DR0 = ABS(RH - RR)
                 DR10 = DR1 + DR0
                 IF(DR10.NE.0.) THEN
                    DS = DS*(DR1/DR10)
                    RM = R1
                    CALL SHAG(X1,Y1,Z1,DS)
                    ENDIF
                 CALL SPHCAR(RR,SLAC,SLOC,X1,Y1,Z1,-1)
                 SLAC = 90. - SLAC*57.2957751
                 SLOC = SLOC*57.2957751
              ENDIF
           endif

C  End of loop IHEM
   77      continue
        enddo

         if (n999.eq.0) goto 91

           IF (NOBM.EQ.1) THEN

C  Interpolation of CGM latitudes if there is no B-min at this
C  magnetic field line

	     rdel = jcs - jcn
           if(rdel.eq.0.) then
               delat = 0.
                          else
               delat = (rslat - rnlat)/rdel
           endif
                jdel = 0
             do jc=jcn+1,jcs-1
                   jdel = jdel + 1
                   arlat(jc) = rnlat + delat*jdel
             enddo
                 RBM = 999.99
                SLAC = 999.99
                SLOC = 999.99

                                        ELSE

C  Geocentric latitude of the CGM equator

	     rla = (rlan + rlas)/2.

C  Interpolation of the CGM latitudes in the Northern hemisphere

	    rdel = SLAN - rla
           if(rdel.eq.0.) then
                delat = 0.
                          else
                delat = rnlat/rdel
           endif
          jdn = abs(rdel)
                   jdel = 0
             do jc = jcn+1,jcn+jdn
                   jdel = jdel + 1
                   arlat(jc) = rnlat - delat*jdel
             enddo

C  Interpolation of the CGM latitudes in the Southern hemisphere

	    rdel = SLAS - rla
           if(rdel.eq.0.) then
                delat = 0.
                          else
                delat = rslat/rdel
           endif
          jds = abs(rdel)
                   jdel = 0
             do jc = jcs-1,jcs-jds,-1
                   jdel = jdel + 1
                   arlat(jc) = rslat + delat*jdel
             enddo
      ENDIF

   91 continue

C  Defining by interpolation the exact values of the CGM latitude
C  and longitude between two adjacent values

	         L1 = 90. - SLAR + 1.
         IF(SLAR.LT.0.) THEN
               L2 = L1-1
                       ELSE
               L2 = L1+1
          ENDIF
             DSLA =  ABS(SLAR - INT(SLAR))
           DELCLA = ARLAT(L2) - ARLAT(L1)
           DELCLO = ARLON(L2) - ARLON(L1)
             CLAR = ARLAT(L1) + DELCLA*DSLA
             CLOR = ARLON(L1) + DELCLO*DSLA

      RETURN
      END
C
C
      SUBROUTINE CORGEO(SLA,SLO,RH,DLA,DLO,CLA,CLO,PMI)
C  *********************************************************************
C  Calculates geocentric coordinates from corrected geomagnetic ones.
C  The code is written by Vladimir Popov and Vladimir Papitashvili
C  in mid-1980s; revised by V. Papitashvili in February 1999
C  *********************************************************************

      COMMON /NM/NM
      COMMON /IYR/IYR

C  This takes care if CLA is a dummy value (e.g., 999.99)

	    jc = 0
      if(abs(cla).lt.0.1) then
          write(7,2)
   2    format(/
     +'WARNING - No calculations within +/-0.1 degree near CGM equator')
          jc = 1
      endif
      if(cla.gt.999..or.jc.eq.1) then
        SLA = 999.99
        SLO = 999.99
        DLA = 999.99
        DLO = 999.99
        PMI = 999.99
        return
      endif

        NG = NM

       COL = 90. - CLA
         R = 10.
        R1 = R
        R0 = R
       COL = COL*0.017453293
       RLO = CLO*0.017453293
        SN = SIN(COL)
       SN2 = SN*SN

C  The CGM latitude should be at least 0.01 deg. away of the CGM pole

      IF(SN2.LT.0.000000003) SN2 = 0.000000003
C      RFI = 1./SN2
       RFI = RH/SN2
       PMI = RFI
      IF(PMI.GT.99.999) PMI = 999.99
         AA10 = R/RFI

C  RFI = R if COL = 90 deg.

        IF(RFI.LE.R) GOTO 1
        SAA = AA10/(1.-AA10)
        SAQ = SQRT(SAA)
       SCLA = ATAN(SAQ)
      IF(CLA.LT.0) SCLA = 3.14159265359 - SCLA

      GOTO 3

    1   SCLA = 1.57079632679
          R0 = RFI

    3 CALL SPHCAR(R0,SCLA,RLO,XM,YM,ZM,1)
      CALL GEOMAG(X,Y,Z,XM,YM,ZM,-1,IYR)
         RL = R0
       FRAC = -0.03/(1. + 3./(RL - 0.6))
      IF(CLA.LT.0.) FRAC = -FRAC
          R = R0

    5    DS = R*FRAC
         NM = (1. + 9./R) + 0.5
      CALL SHAG(X,Y,Z,DS)
          R = SQRT(X**2+Y**2+Z**2)
      IF(R.LE.RH) GOTO 7
         R1 = R
         X1 = X
         Y1 = Y
         Z1 = Z
         GOTO 5

C  Define intersection with the start surface

    7   DR1 = ABS(RH - R1)
        DR0 = ABS(RH - R)
       DR10 = DR1 + DR0
       IF(DR10.NE.0.) THEN
         DS = DS*(DR1/DR10)
         CALL SHAG(X1,Y1,Z1,DS)
       ENDIF

      CALL SPHCAR(R,GTET,GXLA,X1,Y1,Z1,-1)
        GTH = GTET*57.2957751
        SLO = GXLA*57.2957751
        SLA = 90. - GTH
      CALL GEOMAG(X1,Y1,Z1,XM,YM,ZM,1,IYR)
      CALL SPHCAR(RM,TH,PF,XM,YM,ZM,-1)
        DLO = PF*57.2957751
        DLA = 90. - TH*57.2957751

        NM = NG

C  Because CORGEO cannot check if the CGM --> GEO transformation is
C  performed correctly in the equatorial area (that is, where the IGRF
C  field line may never cross the dipole equatorial plane). Therefore,
C  the backward check is required for geocentric latitudes lower than
C  30 degrees (see the paper referenced in GEOLOW)

      IF(ABS(SLA).LT.30..OR.ABS(CLA).LT.30.) THEN
          CALL GEOCOR(SLA,SLO,RH,DLS,DLS,CLAS,CLOS,PMS)

      IF(CLAS.GT.999.) CALL GEOLOW(SLA,SLO,RH,CLAS,CLOS,RBM,SLAC,SLOC)
        IF(ABS(ABS(CLA)-ABS(CLAS)).GE.1.) THEN
          write(7,22) CLA
  22    format(/
     +'WARNING - Selected CGM_Lat.=',f6.2,' is too close to geomagnetic'
     +/'          equator where CGM coordinates are not defined')
           SLA = 999.99
           SLO = 999.99
           PMI = 999.99
        ENDIF
      ENDIF

      RETURN
      END
C
C
      SUBROUTINE GEOCOR(SLA,SLO,RH,DLA,DLO,CLA,CLO,PMI)
C  *********************************************************************
C  Calculates corrected geomagnetic coordinates from geocentric ones
C  The code is written by Vladimir Popov and Vladimir Papitashvili
C  in mid-1980s; revised by V. Papitashvili in February 1999
C  *********************************************************************

      COMMON /NM/NM
      COMMON /IYR/IYR

C  This takes care if SLA is a dummy value (e.g., 999.99)

      if(sla.gt.999.) then
        CLA = 999.99
        CLO = 999.99
        DLA = 999.99
        DLO = 999.99
        PMI = 999.99
        return
      endif

         NG = NM

        COL = 90. - SLA
          R = RH
         R1 = R
        COL = COL*0.017453293
        RLO = SLO*0.017453293
      CALL SPHCAR(R,COL,RLO,X,Y,Z,1)
      CALL GEOMAG(X,Y,Z,XM,YM,ZM,1,IYR)
      CALL SPHCAR(RM,TH,PF,XM,YM,ZM,-1)
        SZM = ZM
        DLO = PF*57.2957751
        DCO = TH*57.2957751
        DLA = 90. - DCO
         RL = R/(SIN(TH))**2
       FRAC = 0.03/(1. + 3./(RL - 0.6))

      IF(SZM.LT.0.) FRAC = -FRAC

C  Error to determine the dipole equtorial plane: aprox. 0.5 arc min

        HHH = 0.0001571

C  Trace the IGRF magnetic field line to the dipole equatorial plane

   1     DS = R*FRAC
   3     NM = (1. + 9./R) + 0.5
         R1 = R
         X1 = X
         Y1 = Y
         Z1 = Z
      CALL SHAG(X,Y,Z,DS)
      CALL GEOMAG(X,Y,Z,XM,YM,ZM,1,IYR)
      CALL SPHCAR(R,C,S,XM,YM,ZM,-1)

C  As tracing goes above (RH+10_Re), use the dipole field line

        IF(R.GT.10.+RH) GOTO 9

C  If the field line returns to the start surface without crossing the
C  dipole equatorial plane, no CGM coordinates can be calculated

        IF(R.LE.RH) GOTO 11

        DCL = C - 1.5707963268
        IF(ABS(DCL).LE.HHH) GOTO 9
        RZM = ZM
        IF(SZM.GT.0..AND.RZM.GT.0.) GOTO 1
        IF(SZM.LT.0..AND.RZM.LT.0.) GOTO 1
          R = R1
          X = X1
          Y = Y1
          Z = Z1
         DS = DS/2.
          GOTO 3

   9  CALL GEOMAG(X,Y,Z,XM,YM,ZM,1,IYR)
      CALL SPHCAR(R,GTET,GXLA,XM,YM,ZM,-1)
         ST = ABS(SIN(GTET))
        RRH = ABS(RH/(R - RH*ST**2))
        CLA = 1.5707963 - ATAN(ST*SQRT(RRH))
        CLA = CLA*57.2957751
        CLO = GXLA*57.2957751
      IF(SZM.LT.0.) CLA = -CLA
       SSLA = 90. - CLA
       SSLA = SSLA*0.017453293
         SN = SIN(SSLA)
C       PMI = 1/(SN*SN)
        PMI = RH/(SN*SN)
        GOTO 13

   11   CLA = 999.99
        CLO = 999.99
        PMI = 999.99

   13    NM = NG

      RETURN
      END
C
C
      SUBROUTINE SHAG(X,Y,Z,DS)
C  *********************************************************************
C  Similar to SUBR STEP from GEOPACK-1996 but SHAG takes into account
C  only internal sources
C  The code is re-written from Tsyganenko's subroutine STEP by
C  Natalia and Vladimir Papitashvili in mid-1980s
C  *********************************************************************

      COMMON/A5/DS3

          DS3 = -DS/3.
      CALL RIGHT(X,Y,Z,R11,R12,R13)
      CALL RIGHT(X+R11,Y+R12,Z+R13,R21,R22,R23)
      CALL RIGHT(X+.5*(R11+R21),Y+.5*(R12+R22),Z+.5*(R13+R23),
     *R31,R32,R33)
      CALL RIGHT(X+.375*(R11+3.*R31),Y+.375*(R12+3.*R32),
     *Z+.375*(R13+3.*R33),R41,R42,R43)
      CALL RIGHT(X+1.5*(R11-3.*R31+4.*R41),
     *Y+1.5*(R12-3.*R32+4.*R42),Z+1.5*(R13-3.*R33+4.*R43),
     *R51,R52,R53)
        X = X+.5*(R11+4.*R41+R51)
        Y = Y+.5*(R12+4.*R42+R52)
        Z = Z+.5*(R13+4.*R43+R53)

      RETURN
      END
C
C
      SUBROUTINE RIGHT(X,Y,Z,R1,R2,R3)
C  *********************************************************************
C  Similar to SUBR RHAND from GEOPACK-1996 but RIGHT takes into account
C  only internal sources
C  The code is re-written from Tsyganenko's subroutine RHAND
C  by Natalia and Vladimir Papitashvili in mid-1980s
C  *********************************************************************

      COMMON /A5/DS3
      COMMON /NM/NM
      COMMON /IYR/IYR

      CALL SPHCAR(R,T,F,X,Y,Z,-1)
      CALL IGRF(IYR,NM,R,T,F,BR,BT,BF)
      CALL BSPCAR(T,F,BR,BT,BF,BX,BY,BZ)
        B = DS3/SQRT(BX**2+BY**2+BZ**2)
       R1 = BX*B
       R2 = BY*B
       R3 = BZ*B

      RETURN
      END
C
C
	SUBROUTINE IGRF(IY,NM,R,T,F,BR,BT,BF)
C  *********************************************************************
C     CALCULATES COMPONENTS OF THE MAIN (INTERNAL) GEOMAGNETIC FIELD IN SPHERICAL
C     GEOGRAPHICAL COORDINATE SYSTEM, USING IAGA INTERNATIONAL GEOMAGNETIC REFERENCE
C     MODEL COEFFICIENTS (e.g., http://www.ngdc.noaa.gov/IAGA/wg8/igrf2000.html)
C
C     UPDATING THE COEFFICIENTS TO A GIVEN EPOCH IS MADE AUTOMATICALLY UPON THE FIRST
C     CALL AND AFTER EVERY CHANGE OF THE PARAMETER IY.
C
C-----INPUT PARAMETERS:
C
C     IY  -  YEAR NUMBER (FOUR-DIGIT; 1965 &LE IY &LE 2005)
C     NM  -  HIGHEST ORDER OF SPHERICAL HARMONICS IN THE SCALAR POTENTIAL (NM &LE 10)
C     R,T,F -  SPHERICAL COORDINATES (RADIUS R IN UNITS RE=6371.2 KM, GEOGRAPHIC
C                COLATITUDE  T  AND LONGITUDE  F  IN RADIANS)
C
C-----OUTPUT PARAMETERS:
C
C     BR,BT,BF - SPHERICAL COMPONENTS OF THE MAIN GEOMAGNETIC FIELD IN NANOTESLA
C
C     LAST MODIFICATION:  JANUARY 5, 2001, BY: N. A. TSYGANENKO
C     THE CODE WAS MODIFIED TO ACCEPT DATES THROUGH 2005.
C     IT HAS ALSO BEEN SLIGHTLY SIMPLIFIED BY TAKING OUT SOME REDUNDANT STATEMENTS,
C     AND A "SAVE" STATEMENT WAS ADDED, TO AVOID POTENTIAL PROBLEMS WITH SOME
C     FORTRAN COMPILERS.
C
C     MODIFIED TO DGRF TO ACCEPT YEARS FROM 1900 THROUGH 2005
C     BY SCOTT BOARDSEN, NASA GSFC, OCTOBER 2004

C     MODIFIED TO IGRF-10 WITH YEARS THROUGH 2010
C     BY V. PAPITASHVILI, NOVEMBER 2005

C     MODIFIED TO IGRF-11 WITH YEARS THROUGH 2015
C     BY V. PAPITASHVILI, January 2011
C
C     MODIFIED TO IGRF-12 WITH YEARS THROUGH 2020
C     BY D. Bilitza, July 2017

C     MODIFIED TO IGRF-13 WITH YEARS THROUGH 2025
C     BY D. Bilitza, July 2021

C     MODIFIED TO IGRF-14 WITH YEARS THROUGH 2030
C     BY D. Bilitza, February 2025
C  *********************************************************************

      SAVE MA,IYR,G,H,REC

      DIMENSION A(11),B(11),DG(45),DH(45),G(66),H(66),REC(66),
     * G1900(66),G1905(66),G1910(66),G1915(66),G1920(66),G1925(66),
     * G1930(66),G1935(66),G1940(66),G1945(66),G1950(66),G1955(66),
     * G1960(66),G1965(66),G1970(66),G1975(66),G1980(66),G1985(66),
     * G1990(66),G1995(66),G2000(66),G2005(66),G2010(66),G2015(66),
     * G2020(66),G2025(66),H2020(66),H2025(66),
     * H1900(66),H1905(66),H1910(66),H1915(66),H1920(66),H1925(66),
     * H1930(66),H1935(66),H1940(66),H1945(66),H1950(66),H1955(66),
     * H1960(66),H1965(66),H1970(66),H1975(66),H1980(66),H1985(66),
     * H1990(66),H1995(66),H2000(66),H2005(66),H2010(66),H2015(66)

      logical	mess
           
      common /iounit/konsol,mess
      
      DATA G1900/
     *       0., -31543.,  -2298.,   -677.,   2905.,    924.,   1022.,
     *   -1469.,   1256.,    572.,    876.,    628.,    660.,   -361.,
     *     134.,   -184.,    328.,    264.,      5.,    -86.,    -16.,
     *      63.,     61.,    -11.,   -217.,    -58.,     59.,    -90.,
     *      70.,    -55.,      0.,     34.,    -41.,    -21.,     18.,
     *       6.,     11.,      8.,     -4.,     -9.,      1.,      2.,
     *      -9.,      5.,      8.,      8.,     10.,      1.,    -11.,
     *      12.,      1.,     -2.,      2.,     -1.,     -1.,     -3.,
     *      -4.,      2.,     -5.,     -2.,      6.,      4.,      0.,
     *       2.,      2.,      0./

      DATA H1900/
     *       0.,      0.,   5922.,      0.,  -1061.,   1121.,      0.,
     *    -330.,      3.,    523.,      0.,    195.,    -69.,   -210.,
     *     -75.,      0.,   -210.,     53.,    -33.,   -124.,      3.,
     *       0.,     -9.,     83.,      2.,    -35.,     36.,    -69.,
     *       0.,    -45.,    -13.,    -10.,     -1.,     28.,    -12.,
     *     -22.,      0.,      8.,    -14.,      7.,    -13.,      5.,
     *      16.,     -5.,    -18.,      0.,    -20.,     14.,      5.,
     *      -3.,     -2.,      8.,     10.,     -2.,      2.,      0.,
     *       2.,      1.,      2.,      6.,     -4.,      0.,     -2.,
     *       4.,      0.,     -6./


      DATA G1905/
     *       0., -31464.,  -2298.,   -728.,   2928.,   1041.,   1037.,
     *   -1494.,   1239.,    635.,    880.,    643.,    653.,   -380.,
     *     146.,   -192.,    328.,    259.,     -1.,    -93.,    -26.,
     *      62.,     60.,    -11.,   -221.,    -57.,     57.,    -92.,
     *      70.,    -54.,      0.,     33.,    -41.,    -20.,     18.,
     *       6.,     11.,      8.,     -4.,     -9.,      1.,      2.,
     *      -8.,      5.,      8.,      8.,     10.,      1.,    -11.,
     *      12.,      1.,     -2.,      2.,      0.,     -1.,     -3.,
     *      -4.,      2.,     -5.,     -2.,      6.,      4.,      0.,
     *       2.,      2.,      0./

      DATA H1905/
     *       0.,      0.,   5909.,      0.,  -1086.,   1065.,      0.,
     *    -357.,     34.,    480.,      0.,    203.,    -77.,   -201.,
     *     -65.,      0.,   -193.,     56.,    -32.,   -125.,     11.,
     *       0.,     -7.,     86.,      4.,    -32.,     32.,    -67.,
     *       0.,    -46.,    -14.,    -11.,      0.,     28.,    -12.,
     *     -22.,      0.,      8.,    -15.,      7.,    -13.,      5.,
     *      16.,     -5.,    -18.,      0.,    -20.,     14.,      5.,
     *      -3.,     -2.,      8.,     10.,     -2.,      2.,      0.,
     *       2.,      1.,      2.,      6.,     -4.,      0.,     -2.,
     *       4.,      0.,     -6./


      DATA G1910/
     *       0., -31354.,  -2297.,   -769.,   2948.,   1176.,   1058.,
     *   -1524.,   1223.,    705.,    884.,    660.,    644.,   -400.,
     *     160.,   -201.,    327.,    253.,     -9.,   -102.,    -38.,
     *      62.,     58.,    -11.,   -224.,    -54.,     54.,    -95.,
     *      71.,    -54.,      1.,     32.,    -40.,    -19.,     18.,
     *       6.,     11.,      8.,     -4.,     -9.,      1.,      2.,
     *      -8.,      5.,      8.,      8.,     10.,      1.,    -11.,
     *      12.,      1.,     -2.,      2.,      0.,     -1.,     -3.,
     *      -4.,      2.,     -5.,     -2.,      6.,      4.,      0.,
     *       2.,      2.,      0./

      DATA H1910/
     *       0.,      0.,   5898.,      0.,  -1128.,   1000.,      0.,
     *    -389.,     62.,    425.,      0.,    211.,    -90.,   -189.,
     *     -55.,      0.,   -172.,     57.,    -33.,   -126.,     21.,
     *       0.,     -5.,     89.,      5.,    -29.,     28.,    -65.,
     *       0.,    -47.,    -14.,    -12.,      1.,     28.,    -13.,
     *     -22.,      0.,      8.,    -15.,      6.,    -13.,      5.,
     *      16.,     -5.,    -18.,      0.,    -20.,     14.,      5.,
     *      -3.,     -2.,      8.,     10.,     -2.,      2.,      0.,
     *       2.,      1.,      2.,      6.,     -4.,      0.,     -2.,
     *       4.,      0.,     -6./


      DATA G1915/
     *       0., -31212.,  -2306.,   -802.,   2956.,   1309.,   1084.,
     *   -1559.,   1212.,    778.,    887.,    678.,    631.,   -416.,
     *     178.,   -211.,    327.,    245.,    -16.,   -111.,    -51.,
     *      61.,     57.,    -10.,   -228.,    -51.,     49.,    -98.,
     *      72.,    -54.,      2.,     31.,    -38.,    -18.,     19.,
     *       6.,     11.,      8.,     -4.,     -9.,      2.,      3.,
     *      -8.,      6.,      8.,      8.,     10.,      1.,    -11.,
     *      12.,      1.,     -2.,      2.,      0.,     -1.,     -3.,
     *      -4.,      2.,     -5.,     -2.,      6.,      4.,      0.,
     *       1.,      2.,      0./

      DATA H1915/
     *       0.,      0.,   5875.,      0.,  -1191.,    917.,      0.,
     *    -421.,     84.,    360.,      0.,    218.,   -109.,   -173.,
     *     -51.,      0.,   -148.,     58.,    -34.,   -126.,     32.,
     *       0.,     -2.,     93.,      8.,    -26.,     23.,    -62.,
     *       0.,    -48.,    -14.,    -12.,      2.,     28.,    -15.,
     *     -22.,      0.,      8.,    -15.,      6.,    -13.,      5.,
     *      16.,     -5.,    -18.,      0.,    -20.,     14.,      5.,
     *      -3.,     -2.,      8.,     10.,     -2.,      2.,      0.,
     *       2.,      1.,      2.,      6.,     -4.,      0.,     -2.,
     *       4.,      0.,     -6./


      DATA G1920/
     *       0., -31060.,  -2317.,   -839.,   2959.,   1407.,   1111.,
     *   -1600.,   1205.,    839.,    889.,    695.,    616.,   -424.,
     *     199.,   -221.,    326.,    236.,    -23.,   -119.,    -62.,
     *      61.,     55.,    -10.,   -233.,    -46.,     44.,   -101.,
     *      73.,    -54.,      2.,     29.,    -37.,    -16.,     19.,
     *       6.,     11.,      7.,     -3.,     -9.,      2.,      4.,
     *      -7.,      6.,      8.,      8.,     10.,      1.,    -11.,
     *      12.,      1.,     -2.,      2.,      0.,     -1.,     -3.,
     *      -4.,      2.,     -5.,     -2.,      6.,      4.,      0.,
     *       1.,      3.,      0./

      DATA H1920/
     *       0.,      0.,   5845.,      0.,  -1259.,    823.,      0.,
     *    -445.,    103.,    293.,      0.,    220.,   -134.,   -153.,
     *     -57.,      0.,   -122.,     58.,    -38.,   -125.,     43.,
     *       0.,      0.,     96.,     11.,    -22.,     18.,    -57.,
     *       0.,    -49.,    -14.,    -13.,      4.,     28.,    -16.,
     *     -22.,      0.,      8.,    -15.,      6.,    -14.,      5.,
     *      17.,     -5.,    -19.,      0.,    -20.,     14.,      5.,
     *      -3.,     -2.,      9.,     10.,     -2.,      2.,      0.,
     *       2.,      1.,      2.,      6.,     -4.,      0.,     -2.,
     *       4.,      0.,     -6./


      DATA G1925/
     *       0., -30926.,  -2318.,   -893.,   2969.,   1471.,   1140.,
     *   -1645.,   1202.,    881.,    891.,    711.,    601.,   -426.,
     *     217.,   -230.,    326.,    226.,    -28.,   -125.,    -69.,
     *      61.,     54.,     -9.,   -238.,    -40.,     39.,   -103.,
     *      73.,    -54.,      3.,     27.,    -35.,    -14.,     19.,
     *       6.,     11.,      7.,     -3.,     -9.,      2.,      4.,
     *      -7.,      7.,      8.,      8.,     10.,      1.,    -11.,
     *      12.,      1.,     -2.,      2.,      0.,     -1.,     -3.,
     *      -4.,      2.,     -5.,     -2.,      6.,      4.,      0.,
     *       1.,      3.,      0./

      DATA H1925/
     *       0.,      0.,   5817.,      0.,  -1334.,    728.,      0.,
     *    -462.,    119.,    229.,      0.,    216.,   -163.,   -130.,
     *     -70.,      0.,    -96.,     58.,    -44.,   -122.,     51.,
     *       0.,      3.,     99.,     14.,    -18.,     13.,    -52.,
     *       0.,    -50.,    -14.,    -14.,      5.,     29.,    -17.,
     *     -21.,      0.,      8.,    -15.,      6.,    -14.,      5.,
     *      17.,     -5.,    -19.,      0.,    -20.,     14.,      5.,
     *      -3.,     -2.,      9.,     10.,     -2.,      2.,      0.,
     *       2.,      1.,      2.,      6.,     -4.,      0.,     -2.,
     *       4.,      0.,     -6./


      DATA G1930/
     *       0., -30805.,  -2316.,   -951.,   2980.,   1517.,   1172.,
     *   -1692.,   1205.,    907.,    896.,    727.,    584.,   -422.,
     *     234.,   -237.,    327.,    218.,    -32.,   -131.,    -74.,
     *      60.,     53.,     -9.,   -242.,    -32.,     32.,   -104.,
     *      74.,    -54.,      4.,     25.,    -34.,    -12.,     18.,
     *       6.,     11.,      7.,     -3.,     -9.,      2.,      5.,
     *      -6.,      8.,      8.,      8.,     10.,      1.,    -12.,
     *      12.,      1.,     -2.,      3.,      0.,     -2.,     -3.,
     *      -4.,      2.,     -5.,     -2.,      6.,      4.,      0.,
     *       1.,      3.,      0./

      DATA H1930/
     *       0.,      0.,   5808.,      0.,  -1424.,    644.,      0.,
     *    -480.,    133.,    166.,      0.,    205.,   -195.,   -109.,
     *     -90.,      0.,    -72.,     60.,    -53.,   -118.,     58.,
     *       0.,      4.,    102.,     19.,    -16.,      8.,    -46.,
     *       0.,    -51.,    -15.,    -14.,      6.,     29.,    -18.,
     *     -20.,      0.,      8.,    -15.,      5.,    -14.,      5.,
     *      18.,     -5.,    -19.,      0.,    -20.,     14.,      5.,
     *      -3.,     -2.,      9.,     10.,     -2.,      2.,      0.,
     *       2.,      1.,      2.,      6.,     -4.,      0.,     -2.,
     *       4.,      0.,     -6./


      DATA G1935/
     *       0., -30715.,  -2306.,  -1018.,   2984.,   1550.,   1206.,
     *   -1740.,   1215.,    918.,    903.,    744.,    565.,   -415.,
     *     249.,   -241.,    329.,    211.,    -33.,   -136.,    -76.,
     *      59.,     53.,     -8.,   -246.,    -25.,     25.,   -106.,
     *      74.,    -53.,      4.,     23.,    -33.,    -11.,     18.,
     *       6.,     11.,      7.,     -3.,     -9.,      1.,      6.,
     *      -6.,      8.,      7.,      8.,     10.,      1.,    -12.,
     *      11.,      1.,     -2.,      3.,      0.,     -2.,     -3.,
     *      -4.,      2.,     -5.,     -2.,      6.,      4.,      0.,
     *       2.,      3.,      0./

      DATA H1935/
     *       0.,      0.,   5812.,      0.,  -1520.,    586.,      0.,
     *    -494.,    146.,    101.,      0.,    188.,   -226.,    -90.,
     *    -114.,      0.,    -51.,     64.,    -64.,   -115.,     64.,
     *       0.,      4.,    104.,     25.,    -15.,      4.,    -40.,
     *       0.,    -52.,    -17.,    -14.,      7.,     29.,    -19.,
     *     -19.,      0.,      8.,    -15.,      5.,    -15.,      5.,
     *      18.,     -5.,    -19.,      0.,    -20.,     15.,      5.,
     *      -3.,     -3.,      9.,     11.,     -2.,      2.,      0.,
     *       2.,      1.,      2.,      6.,     -4.,      0.,     -1.,
     *       4.,      0.,     -6./


      DATA G1940/
     *       0., -30654.,  -2292.,  -1106.,   2981.,   1566.,   1240.,
     *   -1790.,   1232.,    916.,    914.,    762.,    550.,   -405.,
     *     265.,   -241.,    334.,    208.,    -33.,   -141.,    -76.,
     *      57.,     54.,     -7.,   -249.,    -18.,     18.,   -107.,
     *      74.,    -53.,      4.,     20.,    -31.,     -9.,     17.,
     *       5.,     11.,      7.,     -3.,    -10.,      1.,      6.,
     *      -5.,      9.,      7.,      8.,     10.,      1.,    -12.,
     *      11.,      1.,     -2.,      3.,      1.,     -2.,     -3.,
     *      -4.,      2.,     -5.,     -2.,      6.,      4.,      0.,
     *       2.,      3.,      0./

      DATA H1940/
     *       0.,      0.,   5821.,      0.,  -1614.,    528.,      0.,
     *    -499.,    163.,     43.,      0.,    169.,   -252.,    -72.,
     *    -141.,      0.,    -33.,     71.,    -75.,   -113.,     69.,
     *       0.,      4.,    105.,     33.,    -15.,      0.,    -33.,
     *       0.,    -52.,    -18.,    -14.,      7.,     29.,    -20.,
     *     -19.,      0.,      8.,    -14.,      5.,    -15.,      5.,
     *      19.,     -5.,    -19.,      0.,    -21.,     15.,      5.,
     *      -3.,     -3.,      9.,     11.,     -2.,      2.,      0.,
     *       2.,      1.,      2.,      6.,     -4.,      0.,     -1.,
     *       4.,      0.,     -6./


      DATA G1945/
     *       0., -30594.,  -2285.,  -1244.,   2990.,   1578.,   1282.,
     *   -1834.,   1255.,    913.,    944.,    776.,    544.,   -421.,
     *     304.,   -253.,    346.,    194.,    -20.,   -142.,    -82.,
     *      59.,     57.,      6.,   -246.,    -25.,     21.,   -104.,
     *      70.,    -40.,      0.,      0.,    -29.,    -10.,     15.,
     *      29.,     13.,      7.,     -8.,     -5.,      9.,      7.,
     *     -10.,      7.,      2.,      5.,    -21.,      1.,    -11.,
     *       3.,     16.,     -3.,     -4.,     -3.,     -4.,     -3.,
     *      11.,      1.,      2.,     -5.,     -1.,      8.,     -1.,
     *      -3.,      5.,     -2./

      DATA H1945/
     *       0.,      0.,   5810.,      0.,  -1702.,    477.,      0.,
     *    -499.,    186.,    -11.,      0.,    144.,   -276.,    -55.,
     *    -178.,      0.,    -12.,     95.,    -67.,   -119.,     82.,
     *       0.,      6.,    100.,     16.,     -9.,    -16.,    -39.,
     *       0.,    -45.,    -18.,      2.,      6.,     28.,    -17.,
     *     -22.,      0.,     12.,    -21.,    -12.,     -7.,      2.,
     *      18.,      3.,    -11.,      0.,    -27.,     17.,     29.,
     *      -9.,      4.,      9.,      6.,      1.,      8.,      0.,
     *       5.,      1.,    -20.,     -1.,     -6.,      6.,     -4.,
     *      -2.,      0.,     -2./


      DATA G1950/
     *       0., -30554.,  -2250.,  -1341.,   2998.,   1576.,   1297.,
     *   -1889.,   1274.,    896.,    954.,    792.,    528.,   -408.,
     *     303.,   -240.,    349.,    211.,    -20.,   -147.,    -76.,
     *      54.,     57.,      4.,   -247.,    -16.,     12.,   -105.,
     *      65.,    -55.,      2.,      1.,    -40.,     -7.,      5.,
     *      19.,     22.,     15.,     -4.,     -1.,     11.,     15.,
     *     -13.,      5.,     -1.,      3.,     -7.,     -1.,    -25.,
     *      10.,      5.,     -5.,     -2.,      3.,      8.,     -8.,
     *       4.,     -1.,     13.,     -4.,      4.,     12.,      3.,
     *       2.,     10.,      3./

      DATA H1950/
     *       0.,      0.,   5815.,      0.,  -1810.,    381.,      0.,
     *    -476.,    206.,    -46.,      0.,    136.,   -278.,    -37.,
     *    -210.,      0.,      3.,    103.,    -87.,   -122.,     80.,
     *       0.,     -1.,     99.,     33.,    -12.,    -12.,    -30.,
     *       0.,    -35.,    -17.,      0.,     10.,     36.,    -18.,
     *     -16.,      0.,      5.,    -22.,      0.,    -21.,     -8.,
     *      17.,     -4.,    -17.,      0.,    -24.,     19.,     12.,
     *       2.,      2.,      8.,      8.,    -11.,     -7.,      0.,
     *      13.,     -2.,    -10.,      2.,     -3.,      6.,     -3.,
     *       6.,     11.,      8./


      DATA G1955/
     *       0., -30500.,  -2215.,  -1440.,   3003.,   1581.,   1302.,
     *   -1944.,   1288.,    882.,    958.,    796.,    510.,   -397.,
     *     290.,   -229.,    360.,    230.,    -23.,   -152.,    -69.,
     *      47.,     57.,      3.,   -247.,     -8.,      7.,   -107.,
     *      65.,    -56.,      2.,     10.,    -32.,    -11.,      9.,
     *      18.,     11.,      9.,     -6.,    -14.,      6.,     10.,
     *      -7.,      6.,      9.,      4.,      9.,     -4.,     -5.,
     *       2.,      4.,      1.,      2.,      2.,      5.,     -3.,
     *      -5.,     -1.,      2.,     -3.,      7.,      4.,     -2.,
     *       6.,     -2.,      0./

      DATA H1955/
     *       0.,      0.,   5820.,      0.,  -1898.,    291.,      0.,
     *    -462.,    216.,    -83.,      0.,    133.,   -274.,    -23.,
     *    -230.,      0.,     15.,    110.,    -98.,   -121.,     78.,
     *       0.,     -9.,     96.,     48.,    -16.,    -12.,    -24.,
     *       0.,    -50.,    -24.,     -4.,      8.,     28.,    -20.,
     *     -18.,      0.,     10.,    -15.,      5.,    -23.,      3.,
     *      23.,     -4.,    -13.,      0.,    -11.,     12.,      7.,
     *       6.,     -2.,     10.,      7.,     -6.,      5.,      0.,
     *      -4.,      0.,     -8.,     -2.,     -4.,      1.,     -3.,
     *       7.,     -1.,     -3./


      DATA G1960/
     *       0., -30421.,  -2169.,  -1555.,   3002.,   1590.,   1302.,
     *   -1992.,   1289.,    878.,    957.,    800.,    504.,   -394.,
     *     269.,   -222.,    362.,    242.,    -26.,   -156.,    -63.,
     *      46.,     58.,      1.,   -237.,     -1.,     -2.,   -113.,
     *      67.,    -56.,      5.,     15.,    -32.,     -7.,     17.,
     *       8.,     15.,      6.,     -4.,    -11.,      2.,     10.,
     *      -5.,     10.,      8.,      4.,      6.,      0.,     -9.,
     *       1.,      4.,     -1.,     -2.,      3.,     -1.,      1.,
     *      -3.,      4.,      0.,     -1.,      4.,      6.,      1.,
     *      -1.,      2.,      0./

      DATA H1960/
     *       0.,      0.,   5791.,      0.,  -1967.,    206.,      0.,
     *    -414.,    224.,   -130.,      0.,    135.,   -278.,      3.,
     *    -255.,      0.,     16.,    125.,   -117.,   -114.,     81.,
     *       0.,    -10.,     99.,     60.,    -20.,    -11.,    -17.,
     *       0.,    -55.,    -28.,     -6.,      7.,     23.,    -18.,
     *     -17.,      0.,     11.,    -14.,      7.,    -18.,      4.,
     *      23.,      1.,    -20.,      0.,    -18.,     12.,      2.,
     *       0.,     -3.,      9.,      8.,      0.,      5.,      0.,
     *       4.,      1.,      0.,      2.,     -5.,      1.,     -1.,
     *       6.,      0.,     -7./


      DATA G1965/
     *       0., -30334.,  -2119.,  -1662.,   2997.,   1594.,   1297.,
     *   -2038.,   1292.,    856.,    957.,    804.,    479.,   -390.,
     *     252.,   -219.,    358.,    254.,    -31.,   -157.,    -62.,
     *      45.,     61.,      8.,   -228.,      4.,      1.,   -111.,
     *      75.,    -57.,      4.,     13.,    -26.,     -6.,     13.,
     *       1.,     13.,      5.,     -4.,    -14.,      0.,      8.,
     *      -1.,     11.,      4.,      8.,     10.,      2.,    -13.,
     *      10.,     -1.,     -1.,      5.,      1.,     -2.,     -2.,
     *      -3.,      2.,     -5.,     -2.,      4.,      4.,      0.,
     *       2.,      2.,      0./

      DATA H1965/
     *       0.,      0.,   5776.,      0.,  -2016.,    114.,      0.,
     *    -404.,    240.,   -165.,      0.,    148.,   -269.,     13.,
     *    -269.,      0.,     19.,    128.,   -126.,    -97.,     81.,
     *       0.,    -11.,    100.,     68.,    -32.,     -8.,     -7.,
     *       0.,    -61.,    -27.,     -2.,      6.,     26.,    -23.,
     *     -12.,      0.,      7.,    -12.,      9.,    -16.,      4.,
     *      24.,     -3.,    -17.,      0.,    -22.,     15.,      7.,
     *      -4.,     -5.,     10.,     10.,     -4.,      1.,      0.,
     *       2.,      1.,      2.,      6.,     -4.,      0.,     -2.,
     *       3.,      0.,     -6./


      DATA G1970/
     *       0., -30220.,  -2068.,  -1781.,   3000.,   1611.,   1287.,
     *   -2091.,   1278.,    838.,    952.,    800.,    461.,   -395.,
     *     234.,   -216.,    359.,    262.,    -42.,   -160.,    -56.,
     *      43.,     64.,     15.,   -212.,      2.,      3.,   -112.,
     *      72.,    -57.,      1.,     14.,    -22.,     -2.,     13.,
     *      -2.,     14.,      6.,     -2.,    -13.,     -3.,      5.,
     *       0.,     11.,      3.,      8.,     10.,      2.,    -12.,
     *      10.,     -1.,      0.,      3.,      1.,     -1.,     -3.,
     *      -3.,      2.,     -5.,     -1.,      6.,      4.,      1.,
     *       0.,      3.,     -1./

      DATA H1970/
     *       0.,      0.,   5737.,      0.,  -2047.,     25.,      0.,
     *    -366.,    251.,   -196.,      0.,    167.,   -266.,     26.,
     *    -279.,      0.,     26.,    139.,   -139.,    -91.,     83.,
     *       0.,    -12.,    100.,     72.,    -37.,     -6.,      1.,
     *       0.,    -70.,    -27.,     -4.,      8.,     23.,    -23.,
     *     -11.,      0.,      7.,    -15.,      6.,    -17.,      6.,
     *      21.,     -6.,    -16.,      0.,    -21.,     16.,      6.,
     *      -4.,     -5.,     10.,     11.,     -2.,      1.,      0.,
     *       1.,      1.,      3.,      4.,     -4.,      0.,     -1.,
     *       3.,      1.,     -4./


      DATA G1975/
     *       0., -30100.,  -2013.,  -1902.,   3010.,   1632.,   1276.,
     *   -2144.,   1260.,    830.,    946.,    791.,    438.,   -405.,
     *     216.,   -218.,    356.,    264.,    -59.,   -159.,    -49.,
     *      45.,     66.,     28.,   -198.,      1.,      6.,   -111.,
     *      71.,    -56.,      1.,     16.,    -14.,      0.,     12.,
     *      -5.,     14.,      6.,     -1.,    -12.,     -8.,      4.,
     *       0.,     10.,      1.,      7.,     10.,      2.,    -12.,
     *      10.,     -1.,     -1.,      4.,      1.,     -2.,     -3.,
     *      -3.,      2.,     -5.,     -2.,      5.,      4.,      1.,
     *       0.,      3.,     -1./

      DATA H1975/
     *       0.,      0.,   5675.,      0.,  -2067.,    -68.,      0.,
     *    -333.,    262.,   -223.,      0.,    191.,   -265.,     39.,
     *    -288.,      0.,     31.,    148.,   -152.,    -83.,     88.,
     *       0.,    -13.,     99.,     75.,    -41.,     -4.,     11.,
     *       0.,    -77.,    -26.,     -5.,     10.,     22.,    -23.,
     *     -12.,      0.,      6.,    -16.,      4.,    -19.,      6.,
     *      18.,    -10.,    -17.,      0.,    -21.,     16.,      7.,
     *      -4.,     -5.,     10.,     11.,     -3.,      1.,      0.,
     *       1.,      1.,      3.,      4.,     -4.,     -1.,     -1.,
     *       3.,      1.,     -5./


      DATA G1980/
     *       0., -29992.,  -1956.,  -1997.,   3027.,   1663.,   1281.,
     *   -2180.,   1251.,    833.,    938.,    782.,    398.,   -419.,
     *     199.,   -218.,    357.,    261.,    -74.,   -162.,    -48.,
     *      48.,     66.,     42.,   -192.,      4.,     14.,   -108.,
     *      72.,    -59.,      2.,     21.,    -12.,      1.,     11.,
     *      -2.,     18.,      6.,      0.,    -11.,     -7.,      4.,
     *       3.,      6.,     -1.,      5.,     10.,      1.,    -12.,
     *       9.,     -3.,     -1.,      7.,      2.,     -5.,     -4.,
     *      -4.,      2.,     -5.,     -2.,      5.,      3.,      1.,
     *       2.,      3.,      0./

      DATA H1980/
     *       0.,      0.,   5604.,      0.,  -2129.,   -200.,      0.,
     *    -336.,    271.,   -252.,      0.,    212.,   -257.,     53.,
     *    -297.,      0.,     46.,    150.,   -151.,    -78.,     92.,
     *       0.,    -15.,     93.,     71.,    -43.,     -2.,     17.,
     *       0.,    -82.,    -27.,     -5.,     16.,     18.,    -23.,
     *     -10.,      0.,      7.,    -18.,      4.,    -22.,      9.,
     *      16.,    -13.,    -15.,      0.,    -21.,     16.,      9.,
     *      -5.,     -6.,      9.,     10.,     -6.,      2.,      0.,
     *       1.,      0.,      3.,      6.,     -4.,      0.,     -1.,
     *       4.,      0.,     -6./


      DATA G1985/
     *       0., -29873.,  -1905.,  -2072.,   3044.,   1687.,   1296.,
     *   -2208.,   1247.,    829.,    936.,    780.,    361.,   -424.,
     *     170.,   -214.,    355.,    253.,    -93.,   -164.,    -46.,
     *      53.,     65.,     51.,   -185.,      4.,     16.,   -102.,
     *      74.,    -62.,      3.,     24.,     -6.,      4.,     10.,
     *       0.,     21.,      6.,      0.,    -11.,     -9.,      4.,
     *       4.,      4.,     -4.,      5.,     10.,      1.,    -12.,
     *       9.,     -3.,     -1.,      7.,      1.,     -5.,     -4.,
     *      -4.,      3.,     -5.,     -2.,      5.,      3.,      1.,
     *       2.,      3.,      0./

      DATA H1985/
     *       0.,      0.,   5500.,      0.,  -2197.,   -306.,      0.,
     *    -310.,    284.,   -297.,      0.,    232.,   -249.,     69.,
     *    -297.,      0.,     47.,    150.,   -154.,    -75.,     95.,
     *       0.,    -16.,     88.,     69.,    -48.,     -1.,     21.,
     *       0.,    -83.,    -27.,     -2.,     20.,     17.,    -23.,
     *      -7.,      0.,      8.,    -19.,      5.,    -23.,     11.,
     *      14.,    -15.,    -11.,      0.,    -21.,     15.,      9.,
     *      -6.,     -6.,      9.,      9.,     -7.,      2.,      0.,
     *       1.,      0.,      3.,      6.,     -4.,      0.,     -1.,
     *       4.,      0.,     -6./


      DATA G1990/
     *       0., -29775.,  -1848.,  -2131.,   3059.,   1686.,   1314.,
     *   -2239.,   1248.,    802.,    939.,    780.,    325.,   -423.,
     *     141.,   -214.,    353.,    245.,   -109.,   -165.,    -36.,
     *      61.,     65.,     59.,   -178.,      3.,     18.,    -96.,
     *      77.,    -64.,      2.,     26.,     -1.,      5.,      9.,
     *       0.,     23.,      5.,     -1.,    -10.,    -12.,      3.,
     *       4.,      2.,     -6.,      4.,      9.,      1.,    -12.,
     *       9.,     -4.,     -2.,      7.,      1.,     -6.,     -3.,
     *      -4.,      2.,     -5.,     -2.,      4.,      3.,      1.,
     *       3.,      3.,      0./

      DATA H1990/
     *       0.,      0.,   5406.,      0.,  -2279.,   -373.,      0.,
     *    -284.,    293.,   -352.,      0.,    247.,   -240.,     84.,
     *    -299.,      0.,     46.,    154.,   -153.,    -69.,     97.,
     *       0.,    -16.,     82.,     69.,    -52.,      1.,     24.,
     *       0.,    -80.,    -26.,      0.,     21.,     17.,    -23.,
     *      -4.,      0.,     10.,    -19.,      6.,    -22.,     12.,
     *      12.,    -16.,    -10.,      0.,    -20.,     15.,     11.,
     *      -7.,     -7.,      9.,      8.,     -7.,      2.,      0.,
     *       2.,      1.,      3.,      6.,     -4.,      0.,     -2.,
     *       3.,     -1.,     -6./


      DATA G1995/
     *       0., -29692.,  -1784.,  -2200.,   3070.,   1681.,   1335.,
     *   -2267.,   1249.,    759.,    940.,    780.,    290.,   -418.,
     *     122.,   -214.,    352.,    235.,   -118.,   -166.,    -17.,
     *      68.,     67.,     68.,   -170.,     -1.,     19.,    -93.,
     *      77.,    -72.,      1.,     28.,      5.,      4.,      8.,
     *      -2.,     25.,      6.,     -6.,     -9.,    -14.,      9.,
     *       6.,     -5.,     -7.,      4.,      9.,      3.,    -10.,
     *       8.,     -8.,     -1.,     10.,     -2.,     -8.,     -3.,
     *      -6.,      2.,     -4.,     -1.,      4.,      2.,      2.,
     *       5.,      1.,      0./

      DATA H1995/
     *       0.,      0.,   5306.,      0.,  -2366.,   -413.,      0.,
     *    -262.,    302.,   -427.,      0.,    262.,   -236.,     97.,
     *    -306.,      0.,     46.,    165.,   -143.,    -55.,    107.,
     *       0.,    -17.,     72.,     67.,    -58.,      1.,     36.,
     *       0.,    -69.,    -25.,      4.,     24.,     17.,    -24.,
     *      -6.,      0.,     11.,    -21.,      8.,    -23.,     15.,
     *      11.,    -16.,     -4.,      0.,    -20.,     15.,     12.,
     *      -6.,     -8.,      8.,      5.,     -8.,      3.,      0.,
     *       1.,      0.,      4.,      5.,     -5.,     -1.,     -2.,
     *       1.,     -2.,     -7./


      DATA G2000/
     *      0.0,-29619.4, -1728.2, -2267.7,  3068.4,  1670.9,  1339.6,
     *  -2288.0,  1252.1,   714.5,   932.3,   786.8,   250.0,  -403.0,
     *    111.3,  -218.8,   351.4,   222.3,  -130.4,  -168.6,   -12.9,
     *     72.3,    68.2,    74.2,  -160.9,    -5.9,    16.9,   -90.4,
     *     79.0,   -74.0,     0.0,    33.3,     9.1,     6.9,     7.3,
     *     -1.2,    24.4,     6.6,    -9.2,    -7.9,   -16.6,     9.1,
     *      7.0,    -7.9,    -7.0,     5.0,     9.4,     3.0,    -8.4,
     *      6.3,    -8.9,    -1.5,     9.3,    -4.3,    -8.2,    -2.6,
     *     -6.0,     1.7,    -3.1,    -0.5,     3.7,     1.0,     2.0,
     *      4.2,     0.3,    -1.1/

      DATA H2000/
     *      0.0,     0.0,  5186.1,     0.0, -2481.6,  -458.0,     0.0,
     *   -227.6,   293.4,  -491.1,     0.0,   272.6,  -231.9,   119.8,
     *   -303.8,     0.0,    43.8,   171.9,  -133.1,   -39.3,   106.3,
     *      0.0,   -17.4,    63.7,    65.1,   -61.2,     0.7,    43.8,
     *      0.0,   -64.6,   -24.2,     6.2,    24.0,    14.8,   -25.4,
     *     -5.8,     0.0,    11.9,   -21.5,     8.5,   -21.5,    15.5,
     *      8.9,   -14.9,    -2.1,     0.0,   -19.7,    13.4,    12.5,
     *     -6.2,    -8.4,     8.4,     3.8,    -8.2,     4.8,     0.0,
     *      1.7,     0.0,     4.0,     4.9,    -5.9,    -1.2,    -2.9,
     *      0.0,    -2.2,    -7.4/

      DATA G2005/
     *     0.00,-29554.63,-1669.05,-2337.24, 3047.69, 1657.76, 1336.30,
     * -2305.83,  1246.39,  672.51,  920.55,  797.96,  210.65, -379.86,
     *   100.00,  -227.00,  354.41,  208.95, -136.54, -168.05,  -13.55,
     *    73.60,    69.56,   76.74, -151.34,  -14.58,   14.58,  -86.36,
     *    79.88,   -74.46,   -1.65,   38.73,   12.30,    9.37,    5.42,
     *     1.94,    24.80,    7.62,  -11.73,   -6.88,  -18.11,   10.17,
     *     9.36,   -11.25,   -4.87,    5.58,    9.76,    3.58,   -6.94,
     *     5.01,   -10.76,   -1.25,    8.76,   -6.66,   -9.22,   -2.17,
     *    -6.12,     1.42,   -2.35,   -0.15,    3.06,    0.29,    2.06,
     *     3.77,    -0.21,   -2.09/


      DATA H2005/
     *     0.00,    0.00, 5077.99,     0.00,-2594.50, -515.43,    0.00,
     *  -198.86,  269.72, -524.72,     0.00,  282.07, -225.23,  145.15,
     *  -305.36,    0.00,   42.72,   180.25, -123.45,  -19.57,  103.85,
     *     0.00,  -20.33,   54.75,    63.63,  -63.53,    0.24,   50.94,
     *     0.00,  -61.14,  -22.57,     6.82,   25.35,   10.93,  -26.32,
     *    -4.64,    0.00,   11.20,   -20.88,    9.83,  -19.71,   16.22,
     *     7.61,  -12.76,   -0.06,     0.00,  -20.11,   12.69,   12.67,
     *    -6.72,   -8.16,    8.10,     2.92,   -7.73,    6.01,    0.00,
     *     2.19,    0.10,    4.46,     4.76,   -6.58,   -1.01,   -3.47,
     *    -0.86,   -2.31,   -7.93/


      DATA G2010/
     *      0.0,-29496.6, -1586.4,  -2396.1,  3026.3,  1668.2,  1339.8,
     *  -2326.5,  1232.1,   633.7,    912.7,   809.0,   166.6,  -356.8,
     *     89.4,  -230.9,   357.3,    200.3,  -141.1,  -163.2,    -8.0,
     *     72.8,    68.7,    75.9,   -141.4,   -22.8,    13.1,   -78.1,
     *     80.4,   -75.0,    -4.6,     45.2,    14.0,    10.5,     1.6,
     *      4.9,    24.4,     8.2,    -14.5,    -5.6,   -19.3,    11.6,
     *     10.9,   -14.1,    -3.5,      5.5,     9.4,     3.5,    -5.3,
     *      3.1,   -12.4,    -0.8,      8.4,    -8.4,   -10.1,    -1.9,
     *     -6.2,     0.9,    -1.1,     -0.2,     2.5,    -0.3,     2.1,
     *      3.1,    -1.0,    -2.8/
  

      DATA H2010/
     *      0.0,     0.0,  4944.3,      0.0, -2708.5,  -575.7,     0.0,
     *   -160.4,   251.8,  -537.0,      0.0,   286.5,  -211.0,   164.5,
     *   -309.7,     0.0,    44.6,    189.0,  -118.1,     0.0,   101.0,
     *      0.0,   -20.9,    44.2,     61.5,   -66.3,     3.0,    55.4,
     *      0.0,   -57.8,   -21.2,      6.5,    25.0,     7.0,   -27.6,
     *     -3.3,     0.0,    10.8,    -20.0,    11.8,   -17.4,    16.7,
     *      7.0,   -10.7,     1.6,      0.0,   -20.5,    11.5,    12.8,
     *     -7.1,    -7.4,     8.0,      2.1,    -6.1,     7.0,     0.0,
     *      2.7,    -0.1,     4.7,      4.4,    -7.2,    -1.0,    -4.0,
     *     -2.0,    -2.0,    -8.3/


      DATA G2015/
     *      0.0,-29441.5, -1501.8, -2445.9,  3012.2,  1676.3,  1350.3,
     *  -2352.3,  1225.8,   581.7,   907.4,   813.7,   120.5,  -334.9,
     *     70.4,  -232.9,   360.1,   192.4,  -140.9,  -157.4,     4.3,
     *     69.6,    67.6,    72.8,  -129.9,   -28.9,    13.1,   -70.8,
     *     81.3,   -76.0,    -6.8,    51.8,    15.1,     9.3,    -2.9,
     *      6.6,    24.0,     8.9,   -16.8,    -3.2,   -20.6,    13.3,
     *     11.8,   -16.0,    -2.0,     5.3,     8.8,     3.0,    -3.2,
     *      0.7,   -13.2,    -0.1,     8.7,    -9.1,   -10.5,    -2.0,
     *     -6.3,     0.2,     0.6,    -0.6,     1.7,    -0.7,     2.1,
     *      2.3,    -1.8,    -3.6/
  

      DATA H2015/
     *      0.0,     0.0,  4796.0,     0.0, -2845.4,  -642.2,     0.0,
     *   -115.3,   245.0,  -538.7,     0.0,   283.5,  -188.4,   180.9,
     *   -329.2,     0.0,    47.0,   197.0,  -119.1,    16.0,   100.1,
     *      0.0,   -20.6,    33.3,    58.7,   -66.6,     7.3,    62.4,
     *      0.0,   -54.3,   -19.5,     5.6,    24.5,     3.3,   -27.5,
     *     -2.3,     0.0,    10.0,   -18.3,    13.2,   -14.6,    16.2,
     *      5.7,    -9.1,     2.3,     0.0,   -21.8,    10.8,    11.7,
     *     -6.7,    -6.9,     7.8,     1.0,    -3.9,     8.4,     0.0,
     *      3.3,    -0.4,     4.6,     4.4,    -7.9,    -0.6,    -4.2,
     *     -2.8,    -1.1,    -8.7/

      DATA G2020/
     *      0.0,-29403.4, -1451.4, -2499.8,  2982.0,  1676.8,  1363.0,
     *  -2380.8,  1236.1,   525.6,   902.8,   809.5,    86.2,  -309.5,
     *     47.4,  -234.4,   363.3,   187.9,  -140.7,  -151.2,    14.0,
     *     66.0,    65.6,    73.0,  -121.6,   -36.1,    13.6,   -64.8,
     *     80.5,   -76.6,    -8.2,    56.5,    15.8,     6.3,    -7.2,
     *      9.8,    23.7,     9.7,   -17.5,    -0.5,   -21.1,    15.3,
     *     13.6,   -16.6,    -0.3,     5.0,     8.4,     2.8,    -1.5,
     *     -1.1,   -13.2,     1.1,     8.8,    -9.2,   -11.9,    -1.8,
     *     -6.2,    -0.1,     1.7,    -0.9,     0.6,    -0.9,     1.9,
     *      1.4,    -2.4,    -3.8/

      DATA H2020/
     *      0.0,     0.0,  4653.4,     0.0, -2991.7,  -734.6,     0.0,
     *    -82.0,   241.8,  -542.5,     0.0,   282.1,  -158.5,   199.8,
     *   -350.3,     0.0,    47.5,   208.4,  -121.4,    32.1,    99.1,
     *      0.0,   -19.2,    25.0,    52.8,   -64.4,     9.0,    68.0,
     *      0.0,   -51.5,   -16.9,     2.4,    23.6,    -2.2,   -27.2,
     *     -1.9,     0.0,     8.4,   -15.2,    12.8,   -11.8,    14.9,
     *      3.6,    -6.9,     2.9,     0.0,   -23.4,    11.0,     9.9,
     *     -5.1,    -6.2,     7.8,     0.4,    -1.4,     9.6,     0.0,
     *      3.4,    -0.2,     3.5,     4.9,    -8.6,    -0.1,    -4.3,
     *     -3.4,    -0.1,    -8.8/

      DATA G2025/
     *      0.0,-29350.0, -1410.3, -2556.2,  2950.9,  1648.7,  1360.9,
     *  -2404.2,  1243.8,   453.4,   894.7,   799.6,    55.8,  -281.1,
     *     12.0,  -232.9,   369.0,   187.2,  -138.7,  -141.9,    20.9,
     *     64.3,    63.8,    76.7,  -115.7,   -40.9,    14.9,   -60.8,
     *     79.6,   -76.9,    -8.8,    59.3,    15.8,     2.5,   -11.2,
     *     14.3,    23.1,    10.9,   -17.5,     2.0,   -21.8,    16.9,
     *     14.9,   -16.8,     1.0,     4.7,     8.0,     3.0,    -0.2,
     *     -2.5,   -13.1,     2.4,     8.6,    -8.7,   -12.8,    -1.3,
     *     -6.4,     0.2,     2.0,    -1.0,    -0.5,    -0.9,     1.5,
     *      0.9,    -2.6,    -3.9/

      DATA H2025/
     *      0.0,     0.0,  4545.5,     0.0, -3133.6,  -814.2,     0.0,
     *    -56.9,   237.6,  -549.6,     0.0,   278.6,  -134.0,   212.0,
     *   -375.4,     0.0,    45.3,   220.0,  -122.9,    42.9,   106.2,
     *      0.0,   -18.4,    16.8,    48.9,   -59.8,    10.9,    72.8,
     *      0.0,   -48.9,   -14.4,    -1.0,    23.5,    -7.4,   -25.1,
     *     -2.2,     0.0,     7.2,   -12.6,    11.5,    -9.7,    12.7,
     *      0.7,    -5.2,     3.9,     0.0,   -24.8,    12.1,     8.3,
     *     -3.4,    -5.3,     7.2,    -0.6,     0.8,     9.8,     0.0,
     *      3.3,     0.1,     2.5,     5.4,    -9.0,     0.4,    -4.2,
     *     -3.8,     0.9,    -9.0/

      DATA DG/
     *      0.0,    12.6,    10.0,   -11.2,    -5.3,    -8.3,    -1.5,
     *     -4.4,     0.4,   -15.6,    -1.7,    -2.3,    -5.8,     5.4,
     *     -6.8,     0.6,     1.3,     0.0,     0.7,     2.3,     1.0,
     *     -0.2,    -0.3,     0.8,     1.2,    -0.8,     0.4,     0.9,
     *     -0.1,    -0.1,    -0.1,     0.5,    -0.1,    -0.8,    -0.8,
     *      0.9,    -0.1,     0.2,     0.0,     0.4,    -0.1,     0.3,
     *      0.1,     0.0,     0.3/ 

      DATA DH/
     *      0.0,     0.0,   -21.5,     0.0,   -27.3,   -11.1,     0.0,
     *      3.8,    -0.2,    -3.9,     0.0,    -1.3,     4.1,     1.6,
     *     -4.1,     0.0,    -0.5,     2.1,     0.5,     1.7,     1.9,
     *      0.0,     0.3,    -1.6,    -0.4,     0.8,     0.7,     0.9,
     *      0.0,     0.6,     0.5,    -0.7,     0.0,    -0.9,     0.5,
     *     -0.3,     0.0,    -0.3,     0.4,    -0.3,     0.4,    -0.5,
     *     -0.6,     0.3,     0.2/ 
c
c
      DATA MA,IYR/0,0/

      IF(MA.NE.1) GOTO 10
      IF(IY.NE.IYR) GOTO 30
      GOTO 130
10    MA=1
C
      DO 20 N=1,11
         N2=2*N-1
         N2=N2*(N2-2)
         DO 20 M=1,N
            MN=N*(N-1)/2+M
20    REC(MN)=FLOAT((N-M)*(N+M-2))/FLOAT(N2)
C
30    IYR=IY
      IF (IYR.LT.1900) IYR=1900
      IF (IYR.GT.2030) IYR=2030
      IF (IY.NE.IYR.AND.mess) WRITE (konsol,999)IY,IYR

c	include 'igrf_goto.h'
      IF (IYR .LT. 1905) GOTO 1900      !INTERPOLATE BETWEEN 1900 - 1905
      IF (IYR .LT. 1910) GOTO 1905      !INTERPOLATE BETWEEN 1905 - 1910
      IF (IYR .LT. 1915) GOTO 1910      !INTERPOLATE BETWEEN 1910 - 1915
      IF (IYR .LT. 1920) GOTO 1915      !INTERPOLATE BETWEEN 1915 - 1920
      IF (IYR .LT. 1925) GOTO 1920      !INTERPOLATE BETWEEN 1920 - 1925
      IF (IYR .LT. 1930) GOTO 1925      !INTERPOLATE BETWEEN 1925 - 1930
      IF (IYR .LT. 1935) GOTO 1930      !INTERPOLATE BETWEEN 1930 - 1935
      IF (IYR .LT. 1940) GOTO 1935      !INTERPOLATE BETWEEN 1935 - 1940
      IF (IYR .LT. 1945) GOTO 1940      !INTERPOLATE BETWEEN 1940 - 1945
      IF (IYR .LT. 1950) GOTO 1945      !INTERPOLATE BETWEEN 1945 - 1950
      IF (IYR .LT. 1955) GOTO 1950      !INTERPOLATE BETWEEN 1950 - 1955
      IF (IYR .LT. 1960) GOTO 1955      !INTERPOLATE BETWEEN 1955 - 1960
      IF (IYR .LT. 1965) GOTO 1960      !INTERPOLATE BETWEEN 1960 - 1965
      IF (IYR .LT. 1970) GOTO 1965      !INTERPOLATE BETWEEN 1965 - 1970
      IF (IYR .LT. 1975) GOTO 1970      !INTERPOLATE BETWEEN 1970 - 1975
      IF (IYR .LT. 1980) GOTO 1975      !INTERPOLATE BETWEEN 1975 - 1980
      IF (IYR .LT. 1985) GOTO 1980      !INTERPOLATE BETWEEN 1980 - 1985
      IF (IYR .LT. 1990) GOTO 1985      !INTERPOLATE BETWEEN 1985 - 1990
      IF (IYR .LT. 1995) GOTO 1990      !INTERPOLATE BETWEEN 1990 - 1995
      IF (IYR .LT. 2000) GOTO 1995      !INTERPOLATE BETWEEN 1995 - 2000
      IF (IYR .LT. 2005) GOTO 2000      !INTERPOLATE BETWEEN 2000 - 2005
      IF (IYR .LT. 2010) GOTO 2005      !INTERPOLATE BETWEEN 2005 - 2010
      IF (IYR .LT. 2015) GOTO 2010      !INTERPOLATE BETWEEN 2010 - 2015
      IF (IYR .LT. 2020) GOTO 2015      !INTERPOLATE BETWEEN 2015 - 2020
      IF (IYR .LT. 2025) GOTO 2020      !INTERPOLATE BETWEEN 2020 - 2025
C
C       EXTRAPOLATE BEYOND 2025:
C
      DT=FLOAT(IYR)-2025.
      DO 40 N=1,66
         G(N)=G2025(N)
         H(N)=H2025(N)
         IF (N.GT.45) GOTO 40
         G(N)=G(N)+DG(N)*DT
         H(N)=H(N)+DH(N)*DT
40    CONTINUE
      GOTO 300

C       INTERPOLATE BETWEEN YEARS 

C INTERPOLATE BETWEEN 1900 - 1905:
1900  F2=(IYR-1900)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1900(N)*F1+G1905(N)*F2
         H(N)=H1900(N)*F1+H1905(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1905 - 1910:
1905  F2=(IYR-1905)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1905(N)*F1+G1910(N)*F2
         H(N)=H1905(N)*F1+H1910(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1910 - 1915:
1910  F2=(IYR-1910)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1910(N)*F1+G1915(N)*F2
         H(N)=H1910(N)*F1+H1915(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1915 - 1920:
1915  F2=(IYR-1915)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1915(N)*F1+G1920(N)*F2
         H(N)=H1915(N)*F1+H1920(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1920 - 1925:
1920  F2=(IYR-1920)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1920(N)*F1+G1925(N)*F2
         H(N)=H1920(N)*F1+H1925(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1925 - 1930:
1925  F2=(IYR-1925)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1925(N)*F1+G1930(N)*F2
         H(N)=H1925(N)*F1+H1930(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1930 - 1935:
1930  F2=(IYR-1930)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1930(N)*F1+G1935(N)*F2
         H(N)=H1930(N)*F1+H1935(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1935 - 1940:
1935  F2=(IYR-1935)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1935(N)*F1+G1940(N)*F2
         H(N)=H1935(N)*F1+H1940(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1940 - 1945:
1940  F2=(IYR-1940)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1940(N)*F1+G1945(N)*F2
         H(N)=H1940(N)*F1+H1945(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1945 - 1950:
1945  F2=(IYR-1945)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1945(N)*F1+G1950(N)*F2
         H(N)=H1945(N)*F1+H1950(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1950 - 1955:
1950  F2=(IYR-1950)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1950(N)*F1+G1955(N)*F2
         H(N)=H1950(N)*F1+H1955(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1955 - 1960:
1955  F2=(IYR-1955)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1955(N)*F1+G1960(N)*F2
         H(N)=H1955(N)*F1+H1960(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1960 - 1965:
1960  F2=(IYR-1960)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1960(N)*F1+G1965(N)*F2
         H(N)=H1960(N)*F1+H1965(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1965 - 1970:
1965  F2=(IYR-1965)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1965(N)*F1+G1970(N)*F2
         H(N)=H1965(N)*F1+H1970(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1970 - 1975:
1970  F2=(IYR-1970)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1970(N)*F1+G1975(N)*F2
         H(N)=H1970(N)*F1+H1975(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1975 - 1980:
1975  F2=(IYR-1975)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1975(N)*F1+G1980(N)*F2
         H(N)=H1975(N)*F1+H1980(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1980 - 1985:
1980  F2=(IYR-1980)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1980(N)*F1+G1985(N)*F2
         H(N)=H1980(N)*F1+H1985(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1985 - 1990:
1985  F2=(IYR-1985)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1985(N)*F1+G1990(N)*F2
         H(N)=H1985(N)*F1+H1990(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1990 - 1995:
1990  F2=(IYR-1990)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1990(N)*F1+G1995(N)*F2
         H(N)=H1990(N)*F1+H1995(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 1995 - 2000:
1995  F2=(IYR-1995)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G1995(N)*F1+G2000(N)*F2
         H(N)=H1995(N)*F1+H2000(N)*F2
      ENDDO
      GOTO 300
 
C INTERPOLATE BETWEEN 2000 - 2005:
2000  F2=(IYR-2000)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G2000(N)*F1+G2005(N)*F2
         H(N)=H2000(N)*F1+H2005(N)*F2
      ENDDO
      GOTO 300

C INTERPOLATE BETWEEN 2005 - 2010:
2005  F2=(IYR-2005)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G2005(N)*F1+G2010(N)*F2
         H(N)=H2005(N)*F1+H2010(N)*F2
      ENDDO
      GOTO 300

C INTERPOLATE BETWEEN 2010 - 2015:
2010  F2=(IYR-2010)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G2010(N)*F1+G2015(N)*F2
         H(N)=H2010(N)*F1+H2015(N)*F2
      ENDDO
      GOTO 300

C INTERPOLATE BETWEEN 2015 - 2020:
2015  F2=(IYR-2015)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G2015(N)*F1+G2020(N)*F2
         H(N)=H2015(N)*F1+H2020(N)*F2
      ENDDO
      GOTO 300

C INTERPOLATE BETWEEN 2020 - 2025:
2020  F2=(IYR-2020)/5.
      F1=1.-F2
      DO N=1,66
         G(N)=G2020(N)*F1+G2025(N)*F2
         H(N)=H2020(N)*F1+H2025(N)*F2
      ENDDO
      GOTO 300

C   COEFFICIENTS FOR A GIVEN YEAR HAVE BEEN CALCULATED; NOW MULTIPLY
C   THEM BY SCHMIDT NORMALIZATION FACTORS:

300   S=1.
      DO 120 N=2,11
         MN=N*(N-1)/2+1
         S=S*FLOAT(2*N-3)/FLOAT(N-1)
         G(MN)=G(MN)*S
         H(MN)=H(MN)*S
         P=S
         DO 120 M=2,N
            AA=1.
            IF (M.EQ.2) AA=2.
            P=P*SQRT(AA*FLOAT(N-M+1)/FLOAT(N+M-2))
            MNN=MN+M-1
            G(MNN)=G(MNN)*P
120         H(MNN)=H(MNN)*P

C     NOW CALCULATE THE FIELD COMPONENTS
C     (IN CASE OF MULTIPLE INVOCATIONS WITH THE SAME VALUES OF IY AND NM,
C      CALCULATIONS START RIGHT HERE):

130   PP=1./R
      P=PP

      K=NM+1
      DO 150 N=1,K
         P=P*PP
         A(N)=P
150      B(N)=P*N
      P=1.
      D=0.
      BBR=0.
      BBT=0.
      BBF=0.
      U=T
      CF=COS(F)
      SF=SIN(F)
      C=COS(U)
      S=SIN(U)
      DO 200 M=1,K
         IF(M.EQ.1) GOTO 160
         MM=M-1
         W=X
         X=W*CF+Y*SF
         Y=Y*CF-W*SF
         GOTO 170
160      X=0.
         Y=1.
170      Q=P
         Z=D
         BI=0.
         P2=0.
         D2=0.
         DO 190 N=M,K
            AN=A(N)
            MN=N*(N-1)/2+M
            E=G(MN)
            HH=H(MN)
            W=E*Y+HH*X
            BBR=BBR+B(N)*W*Q
            BBT=BBT-AN*W*Z
            IF(M.EQ.1) GOTO 180
            QQ=Q
            IF(S.LT.1.E-5) QQ=Z
            BI=BI+AN*(E*X-HH*Y)*QQ
180         XK=REC(MN)
            DP=C*Z-S*Q-XK*D2
            PM=C*Q-XK*P2
            D2=Z
            P2=Q
            Z=DP
190        Q=PM
         D=S*D+C*P
         P=S*P
         IF(M.EQ.1) GOTO 200
         BI=BI*MM
         BBF=BBF+BI
200   CONTINUE
C
      BR=BBR
      BT=BBT
      IF(S.LT.1.E-5) GOTO 210
      BF=BBF/S
      RETURN
210   IF(C.LT.0.) BBF=-BBF
      BF=BBF

      RETURN
C
999   FORMAT(/
     * '   IGRF: GIVEN YEAR',I5,' IS OUT OF INTERVAL 1900-2025'/,
     * '   *** CALCULATIONS WILL BE DONE FOR YEAR =',I5,' ***'/)
      END
C
C

      SUBROUTINE RECALC(IYR,IDAY,IHOUR,MIN,ISEC)
C  *********************************************************************
C  If only IYR is given then CALL RECALC(IYR,0,25,0,0)
C  THIS IS A MODIFIED VERSION OF THE SUBROUTINE RECOMP WRITTEN BY
C  N. A. TSYGANENKO. SINCE I WANT TO USE IT IN PLACE OF SUBROUTINE
C  RECALC, I HAVE RENAMED THIS ROUTINE RECALC AND ELIMINATED THE
C  ORIGINAL RECALC FROM THIS VERSION OF THE <GEOPACK.FOR> PACKAGE.
C  THIS WAY ALL ORIGINAL CALLS TO RECALC WILL CONTINUE TO WORK WITHOUT
C  HAVING TO CHANGE THEM TO CALLS TO RECOMP.
C
C  AN ALTERNATIVE VERSION OF THE SUBROUTINE RECALC FROM THE GEOPACK
C  PACKAGE BASED ON A DIFFERENT APPROACH TO DERIVATION OF ROTATION
C  MATRIX ELEMENTS
C
C  THIS SUBROUTINE WORKS BY 20% FASTER THAN RECALC AND IS EASIER TO
C  UNDERSTAND
C  #####################################################
C  #  WRITTEN BY  N.A. TSYGANENKO ON DECEMBER 1, 1991  #
C  #####################################################
C  Modified by Mauricio Peredo, Hughes STX at NASA/GSFC Code 695,
C  September 1992
C
C  Modified to accept years up to year 2000 and updated IGRF coeficients
C     from 1945 (updated by V. Papitashvili, February 1995)
C  Modified to accept years up to 2005 (V. Papitashvili, January 2001)
C  Modified to accept years from 1900 through 2010 using the DGRF & 
C     IGRF-10 coeficients (updated by V. Papitashvili, November 2005)
C  Modified to accept years up to 2015 (V. Papitashvili, January 2011)
C  Modified to accept years up to 2020 (D. Bilitza, October 2015)
C  Modified to accept years up to 2025 (D. Bilitza, October 2020)
C  Modified to accept years up to 2030 (D. Bilitza, February 2025) (***)
C
C   OTHER SUBROUTINES CALLED BY THIS ONE: SUN
C
C     IYR = YEAR NUMBER (FOUR DIGITS)
C     IDAY = DAY OF YEAR (DAY 1 = JAN 1)
C     IHOUR = HOUR OF DAY (00 TO 23)
C     MIN = MINUTE OF HOUR (00 TO 59)
C     ISEC = SECONDS OF DAY(00 TO 59)
C  *********************************************************************

        IMPLICIT NONE

        REAL ST0,CT0,SL0,CL0,CTCL,STCL,CTSL,STSL,SFI,CFI,SPS,CPS,
     1       SHI,CHI,HI,PSI,XMUT,A11,A21,A31,A12,A22,A32,A13,A23,
     2       A33,DS3,F2,F1,G10,G11,H11,DT,SQ,SQQ,SQR,S1,S2,
     3       S3,CGST,SGST,DIP1,DIP2,DIP3,Y1,Y2,Y3,Y,Z1,Z2,Z3,DJ,
     4       T,OBLIQ,DZ1,DZ2,DZ3,DY1,DY2,DY3,EXMAGX,EXMAGY,EXMAGZ,
     5       EYMAGX,EYMAGY,GST,SLONG,SRASN,SDEC,BA(8),DECARG

        INTEGER IYR,IDAY,IHOUR,MIN,ISEC,K,IY,IDE,IYE,konsol
        logical	mess

       COMMON/C1/ ST0,CT0,SL0,CL0,CTCL,STCL,CTSL,STSL,SFI,CFI,SPS,CPS,
     * SHI,CHI,HI,PSI,XMUT,A11,A21,A31,A12,A22,A32,A13,A23,A33,DS3,
     * K,IY,BA
           
        common/iounit/konsol,mess  

      DATA IYE,IDE/2*0/
      IF (IYR.EQ.IYE.AND.IDAY.EQ.IDE) GOTO 5

C  IYE AND IDE ARE THE CURRENT VALUES OF YEAR AND DAY NUMBER

      IY=IYR
      IDE=IDAY
      IF(IY.LT.1900) IY=1900
c      IF(IY.GT.2015) IY=2015
c      IF(IY.GT.2020) IY=2020
c***   IF(IY.GT.2025) IY=2025
      IF(IY.GT.2030) IY=2030

C  IF IYR IS OUTSIDE THE TIME INTERVAL COVERED BY THE CURRENT IGRF, THE
C  SUBROUTINE GIVES A WARNING (BUT DOES NOT REPEAT IT AT THE NEXT CALLS)

      IF(IY.NE.IYR.AND.mess) write(konsol,10) IYR,IY
      IYE=IY

C  LINEAR INTERPOLATION OF THE GEODIPOLE MOMENT COMPONENTS BETWEEN THE
C  VALUES FOR THE NEAREST EPOCHS (***):

       IF (IY.LT.1905) THEN                             !1900-1905
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1900.)/5.
           F1=1.D0-F2
           G10=31543.*F1+31464.*F2
           G11=-2298.*F1-2298.*F2
           H11= 5922.*F1+5909.*F2
       ELSEIF (IY.LT.1910) THEN                         !1905-1910
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1905.)/5.
           F1=1.D0-F2
           G10=31464.*F1+31354.*F2
           G11=-2298.*F1-2297.*F2
           H11= 5909.*F1+5898.*F2
       ELSEIF (IY.LT.1915) THEN                         !1910-1915
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1910.)/5.
           F1=1.D0-F2
           G10=31354.*F1+31212.*F2
           G11=-2297.*F1-2306.*F2
           H11= 5898.*F1+5875.*F2
       ELSEIF (IY.LT.1920) THEN                         !1915-1920
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1915.)/5.
           F1=1.D0-F2
           G10=31212.*F1+31060.*F2
           G11=-2306.*F1-2317.*F2
           H11= 5875.*F1+5845.*F2
       ELSEIF (IY.LT.1925) THEN                         !1920-1925
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1920.)/5.
           F1=1.D0-F2
           G10=31060.*F1+30926.*F2
           G11=-2317.*F1-2318.*F2
           H11= 5845.*F1+5817.*F2
       ELSEIF (IY.LT.1930) THEN                         !1925-1930
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1925.)/5.
           F1=1.D0-F2
           G10=30926.*F1+30805.*F2
           G11=-2318.*F1-2316.*F2
           H11= 5817.*F1+5808.*F2
        ELSEIF (IY.LT.1935) THEN                        !1930-1935
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1930.)/5.
           F1=1.D0-F2
           G10=30805.*F1+30715.*F2
           G11=-2316.*F1-2306.*F2
           H11= 5808.*F1+5812.*F2
        ELSEIF (IY.LT.1940) THEN                        !1935-1940
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1935.)/5.
           F1=1.D0-F2
           G10=30715.*F1+30654.*F2
           G11=-2306.*F1-2292.*F2
           H11= 5812.*F1+5821.*F2
        ELSEIF (IY.LT.1945) THEN                        !1940-1945
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1940.)/5.
           F1=1.D0-F2
           G10=30654.*F1+30594.*F2
           G11=-2292.*F1-2285.*F2
           H11= 5821.*F1+5810.*F2
        ELSEIF (IY.LT.1950) THEN                        !1945-1950
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1945.)/5.
           F1=1.D0-F2
           G10=30594.*F1+30554.*F2
           G11=-2285.*F1-2250.*F2
           H11= 5810.*F1+5815.*F2
        ELSEIF (IY.LT.1955) THEN                        !1950-1955
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1950.)/5.
           F1=1.D0-F2
           G10=30554.*F1+30500.*F2
           G11=-2250.*F1-2215.*F2
           H11= 5815.*F1+5820.*F2
        ELSEIF (IY.LT.1960) THEN                        !1955-1960
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1955.)/5.
           F1=1.D0-F2
           G10=30500.*F1+30421.*F2
           G11=-2215.*F1-2169.*F2
           H11= 5820.*F1+5791.*F2
        ELSEIF (IY.LT.1965) THEN                        !1960-1965
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1960.)/5.
           F1=1.D0-F2
           G10=30421.*F1+30334.*F2
           G11=-2169.*F1-2119.*F2
           H11= 5791.*F1+5776.*F2
        ELSEIF (IY.LT.1970) THEN                        !1965-1970
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1965.)/5.
           F1=1.D0-F2
           G10=30334.*F1+30220.*F2
           G11=-2119.*F1-2068.*F2
           H11= 5776.*F1+5737.*F2
        ELSEIF (IY.LT.1975) THEN                        !1970-1975
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1970.)/5.
           F1=1.D0-F2
           G10=30220.*F1+30100.*F2
           G11=-2068.*F1-2013.*F2
           H11= 5737.*F1+5675.*F2
        ELSEIF (IY.LT.1980) THEN                        !1975-1980
           F2=(DFLOAT(IY)+DFLOAT(IDAY)/365.-1975.)/5.
           F1=1.D0-F2
           G10=30100.*F1+29992.*F2
           G11=-2013.*F1-1956.*F2
           H11= 5675.*F1+5604.*F2
        ELSEIF (IY.LT.1985) THEN                        !1980-1985
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1980.)/5.
           F1=1.D0-F2
           G10=29992.*F1+29873.*F2
           G11=-1956.*F1-1905.*F2
           H11= 5604.*F1+5500.*F2
        ELSEIF (IY.LT.1990) THEN                        !1985-1990
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1985.)/5.
           F1=1.D0-F2
           G10=29873.*F1+29775.*F2
           G11=-1905.*F1-1848.*F2
           H11= 5500.*F1+5406.*F2
        ELSEIF (IY.LT.1995) THEN                        !1990-1995
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1990.)/5.
           F1=1.D0-F2
           G10=29775.*F1+29692.*F2
           G11=-1848.*F1-1784.*F2
           H11= 5406.*F1+5306.*F2
        ELSEIF (IY.LT.2000) THEN                        !1995-2000
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-1995.)/5.
           F1=1.D0-F2
           G10=29692.*F1+29619.4*F2
           G11=-1784.*F1-1728.2*F2
           H11= 5306.*F1+5186.1*F2
        ELSEIF (IY.LT.2005) THEN                        !2000-2005
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-2000.)/5.
           F1=1.D0-F2
           G10=29619.4*F1+29554.63*F2
           G11=-1728.2*F1-1669.05*F2
           H11= 5186.1*F1+5077.99*F2
        ELSEIF (IY.LT.2010) THEN                        !2005-2010
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-2005.)/5.
           F1=1.D0-F2
           G10=29554.63*F1+29496.57*F2
           G11=-1669.05*F1-1586.42*F2
           H11= 5077.99*F1+4944.26*F2
        ELSEIF (IY.LT.2015) THEN                        !2010-2015
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-2010.)/5.
           F1=1.D0-F2
           G10=29496.57*F1+29441.46*F2
           G11=-1586.42*F1-1501.77*F2
           H11= 4944.26*F1+4795.99*F2
        ELSEIF (IY.LT.2020) THEN                        !2015-2020
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-2015.)/5.
           F1=1.D0-F2
           G10=29441.46*F1+29403.4*F2
           G11=-1501.77*F1-1451.4*F2
           H11= 4795.99*F1+4653.3*F2
        ELSEIF (IY.LT.2025) THEN                        !2020-2025
           F2=(FLOAT(IY)+FLOAT(IDAY)/365.-2020.)/5.
           F1=1.D0-F2
           G10=29403.41*F1+29350.0*F2
           G11=-1451.37*F1-1410.3*F2
           H11= 4653.35*F1+4545.5*F2
        ELSE                                            !2025-2030
           DT=FLOAT(IY)+FLOAT(IDAY)/365.-2025.
           G10=29350.0-12.6*DT
           G11=-1410.3+10.0*DT
           H11= 4545.5-21.5*DT
        ENDIF

C  NOW CALCULATE THE COMPONENTS OF THE UNIT VECTOR EzMAG IN GEO COORD
C  SYSTEM:
C  SIN(TETA0)*COS(LAMBDA0), SIN(TETA0)*SIN(LAMBDA0), AND COS(TETA0)
C         ST0 * CL0                ST0 * SL0                CT0

      SQ=G11**2+H11**2
      SQQ=SQRT(SQ)
      SQR=SQRT(G10**2+SQ)
      SL0=-H11/SQQ
      CL0=-G11/SQQ
      ST0=SQQ/SQR
      CT0=G10/SQR
      STCL=ST0*CL0
      STSL=ST0*SL0
      CTSL=CT0*SL0
      CTCL=CT0*CL0

C  THE CALCULATIONS ARE TERMINATED IF ONLY GEO-MAG TRANSFORMATION
C  IS TO BE DONE  (IHOUR>24 IS THE AGREED CONDITION FOR THIS CASE):

   5   IF (IHOUR.GT.24) RETURN

      CALL SUN(IY,IDAY,IHOUR,MIN,ISEC,GST,SLONG,SRASN,SDEC)

C  S1,S2, AND S3 ARE THE COMPONENTS OF THE UNIT VECTOR EXGSM=EXGSE
C  IN THE SYSTEM GEI POINTING FROM THE EARTH'S CENTER TO THE SUN:

      S1=COS(SRASN)*COS(SDEC)
      S2=SIN(SRASN)*COS(SDEC)
      S3=SIN(SDEC)
      CGST=COS(GST)
      SGST=SIN(GST)

C  DIP1, DIP2, AND DIP3 ARE THE COMPONENTS OF THE UNIT VECTOR
C  EZSM=EZMAG IN THE SYSTEM GEI:

      DIP1=STCL*CGST-STSL*SGST
      DIP2=STCL*SGST+STSL*CGST
      DIP3=CT0

C  NOW CALCULATE THE COMPONENTS OF THE UNIT VECTOR EYGSM IN THE SYSTEM
C  GEI BY TAKING THE VECTOR PRODUCT D x S AND NORMALIZING IT TO UNIT
C  LENGTH:

      Y1=DIP2*S3-DIP3*S2
      Y2=DIP3*S1-DIP1*S3
      Y3=DIP1*S2-DIP2*S1
      Y=SQRT(Y1*Y1+Y2*Y2+Y3*Y3)
      Y1=Y1/Y
      Y2=Y2/Y
      Y3=Y3/Y

C  THEN IN THE GEI SYSTEM THE UNIT VECTOR Z=EZGSM=EXGSM x EYGSM=S x Y
C  HAS THE COMPONENTS:

      Z1=S2*Y3-S3*Y2
      Z2=S3*Y1-S1*Y3
      Z3=S1*Y2-S2*Y1

C  THE VECTOR EZGSE (HERE DZ) IN GEI HAS THE COMPONENTS (0,-SIN(DELTA),
C  COS(DELTA)) = (0.,-0.397823,0.917462); HERE DELTA = 23.44214 DEG FOR
C  THE EPOCH 1978 (SEE THE BOOK BY GUREVICH OR OTHER ASTRONOMICAL
C  HANDBOOKS). HERE THE MOST ACCURATE TIME-DEPENDENT FORMULA IS USED:

      DJ=FLOAT(365*(IY-1900)+(IY-1901)/4 +IDAY)-0.5+FLOAT(ISEC)/86400.
      T=DJ/36525.
      OBLIQ=(23.45229-0.0130125*T)/57.2957795
      DZ1=0.
      DZ2=-SIN(OBLIQ)
      DZ3=COS(OBLIQ)

C  THEN THE UNIT VECTOR EYGSE IN GEI SYSTEM IS THE VECTOR PRODUCT DZ x S

      DY1=DZ2*S3-DZ3*S2
      DY2=DZ3*S1-DZ1*S3
      DY3=DZ1*S2-DZ2*S1

C  THE ELEMENTS OF THE MATRIX GSE TO GSM ARE THE SCALAR PRODUCTS:
C  CHI=EM22=(EYGSM,EYGSE), SHI=EM23=(EYGSM,EZGSE),
C  EM32=(EZGSM,EYGSE)=-EM23, AND EM33=(EZGSM,EZGSE)=EM22

      CHI=Y1*DY1+Y2*DY2+Y3*DY3
      SHI=Y1*DZ1+Y2*DZ2+Y3*DZ3
          DECARG=SHI
          IF(ABS(DECARG).GT.1.) DECARG=SIGN(1.,DECARG)
      HI=ASIN(DECARG)

C  TILT ANGLE: PSI=ARCSIN(DIP,EXGSM)

      SPS=DIP1*S1+DIP2*S2+DIP3*S3
      CPS=SQRT(1.-SPS**2)
          DECARG=SPS
          IF(ABS(DECARG).GT.1.) DECARG=SIGN(1.,DECARG)
      PSI=ASIN(DECARG)

C  THE ELEMENTS OF THE MATRIX MAG TO SM ARE THE SCALAR PRODUCTS:
C  CFI=GM22=(EYSM,EYMAG), SFI=GM23=(EYSM,EXMAG); THEY CAN BE DERIVED
C  AS FOLLOWS:

C  IN GEO THE VECTORS EXMAG AND EYMAG HAVE THE COMPONENTS
C  (CT0*CL0,CT0*SL0,-ST0) AND (-SL0,CL0,0), RESPECTIVELY. HENCE, IN
C  GEI SYSTEM THE COMPONENTS ARE:
C  EXMAG:    CT0*CL0*COS(GST)-CT0*SL0*SIN(GST)
C            CT0*CL0*SIN(GST)+CT0*SL0*COS(GST)
C            -ST0
C  EYMAG:    -SL0*COS(GST)-CL0*SIN(GST)
C            -SL0*SIN(GST)+CL0*COS(GST)
C             0
C  THE COMPONENTS OF EYSM IN GEI WERE FOUND ABOVE AS Y1, Y2, AND Y3;
C  NOW WE ONLY HAVE TO COMBINE THE QUANTITIES INTO SCALAR PRODUCTS:

      EXMAGX=CT0*(CL0*CGST-SL0*SGST)
      EXMAGY=CT0*(CL0*SGST+SL0*CGST)
      EXMAGZ=-ST0
      EYMAGX=-(SL0*CGST+CL0*SGST)
      EYMAGY=-(SL0*SGST-CL0*CGST)
      CFI=Y1*EYMAGX+Y2*EYMAGY
      SFI=Y1*EXMAGX+Y2*EXMAGY+Y3*EXMAGZ

      XMUT=(ATAN2(SFI,CFI)+3.1415926536)*3.8197186342

C  THE ELEMENTS OF THE MATRIX GEO TO GSM ARE THE SCALAR PRODUCTS:

C  A11=(EXGEO,EXGSM), A12=(EYGEO,EXGSM), A13=(EZGEO,EXGSM),
C  A21=(EXGEO,EYGSM), A22=(EYGEO,EYGSM), A23=(EZGEO,EYGSM),
C  A31=(EXGEO,EZGSM), A32=(EYGEO,EZGSM), A33=(EZGEO,EZGSM),

C  ALL THE UNIT VECTORS IN BRACKETS ARE ALREADY DEFINED IN GEI:

C  EXGEO=(CGST,SGST,0), EYGEO=(-SGST,CGST,0), EZGEO=(0,0,1)
C  EXGSM=(S1,S2,S3),  EYGSM=(Y1,Y2,Y3),   EZGSM=(Z1,Z2,Z3)
C  AND  THEREFORE:

      A11=S1*CGST+S2*SGST
      A12=-S1*SGST+S2*CGST
      A13=S3
      A21=Y1*CGST+Y2*SGST
      A22=-Y1*SGST+Y2*CGST
      A23=Y3
      A31=Z1*CGST+Z2*SGST
      A32=-Z1*SGST+Z2*CGST
      A33=Z3

 10   FORMAT(/
     * ' RECALC: GIVEN YEAR',I5,' IS OUT OF INTERVAL 1900-2030'/,
     * '   *** CALCULATIONS WILL BE DONE FOR YEAR =',I5,' ***'/)

      RETURN
      END
C
C
      SUBROUTINE SPHCAR(R,TETA,PHI,X,Y,Z,J)
C ===============================================================               
C  CONVERTS GEOCENTRIC CARTESIAN COORDINATES OF a LOCATION INTO 
C  THE TOPOCENTRIC COORDINATES (TETA, PHI, R) At that LOCATION
C  FOR J<0 AND VICA VERSA FOR J>0 (TETA AND PHI IN RADIANS).
C                  J>0            J<0
C-----INPUT:   J,R,TETA,PHI     J,X,Y,Z
C----OUTPUT:      X,Y,Z        R,TETA,PHI
C  AUTHOR: NIKOLAI A. TSYGANENKO, INSTITUTE OF PHYSICS, ST.-
C  PETERSBURG STATE UNIVERSITY, STARY PETERGOF 198904, ST.-
C  PETERSBURG, RUSSIA.
C ===============================================================               

        IMPLICIT NONE

        REAL R,TETA,PHI,X,Y,Z,SQ

        INTEGER J

      IF(J.GT.0) GOTO 3
      SQ=X**2+Y**2
      R=SQRT(SQ+Z**2)
      IF (SQ.NE.0.) GOTO 2
      PHI=0.
      IF (Z.LT.0.) GOTO 1
      TETA=0.
      RETURN
  1   TETA=3.141592654
      RETURN
  2   SQ=SQRT(SQ)
      PHI=ATAN2(Y,X)
      TETA=ATAN2(SQ,Z)
      IF (PHI.LT.0.) PHI=PHI+6.28318531
      RETURN
  3   SQ=R*SIN(TETA)
      X=SQ*COS(PHI)
      Y=SQ*SIN(PHI)
      Z=R*COS(TETA)

      RETURN
      END
C
C
      SUBROUTINE BSPCAR(TETA,PHI,BR,BTET,BPHI,BX,BY,BZ)
C  *********************************************************************
C   CALCULATES CARTESIAN FIELD COMPONENTS FROM SPHERICAL ONES
C-----INPUT:   TETA,PHI - SPHERICAL ANGLES OF THE POINT IN RADIANS
C              BR,BTET,BPHI -  SPHERICAL COMPONENTS OF THE FIELD
C-----OUTPUT:  BX,BY,BZ - CARTESIAN COMPONENTS OF THE FIELD
C  AUTHOR: NIKOLAI A. TSYGANENKO, INSTITUTE OF PHYSICS, ST.-PETERSBURG
C      STATE UNIVERSITY, STARY PETERGOF 198904, ST.-PETERSBURG, RUSSIA
C      (now the NASA Goddard Space Fligth Center, Greenbelt, Maryland)
C  *********************************************************************

        IMPLICIT NONE

        REAL TETA,PHI,BR,BTET,BPHI,BX,BY,BZ,S,C,SF,CF,BE

      S=SIN(TETA)
      C=COS(TETA)
      SF=SIN(PHI)
      CF=COS(PHI)
      BE=BR*S+BTET*C
      BX=BE*CF-BPHI*SF
      BY=BE*SF+BPHI*CF
      BZ=BR*C-BTET*S
      RETURN
      END
C
C
      SUBROUTINE GEOMAG(XGEO,YGEO,ZGEO,XMAG,YMAG,ZMAG,J,IYR)
C ===============================================================               
C CONVERTS GEOCENTRIC CARTESIAN COORDINATES (XGEO,YGEO,ZGEO) TO 
C MAGNETIC DIPOLE CARTESIAN COORDINATES (XMAG,YMAG,ZMAG) FOR J>0
C OR VICA VERSA FOR J<0. IYR IS YEAR NUMBER (FOUR DIGITS).
C
C                           J>0                J<0
C-----INPUT:  J,XGEO,YGEO,ZGEO,IYR   J,XMAG,YMAG,ZMAG,IYR
C-----OUTPUT:    XMAG,YMAG,ZMAG        XGEO,YGEO,ZGEO
C
C AUTHOR: NIKOLAI A. TSYGANENKO, INSTITUTE OF PHYSICS, ST.-
C PETERSBURG STATE UNIVERSITY, STARY PETERGOF 198904, ST.-PETERS-
C BURG, RUSSIA.
C ===============================================================               

        IMPLICIT NONE

        REAL XGEO,YGEO,ZGEO,XMAG,YMAG,ZMAG,ST0,CT0,SL0,CL0,CTCL,
     *       STCL,CTSL,STSL,AB(19),BB(8)

        INTEGER J,IYR,K,IY,II

      COMMON/C1/ ST0,CT0,SL0,CL0,CTCL,STCL,CTSL,STSL,AB,K,IY,BB
      DATA II/1/
      IF(IYR.EQ.II) GOTO 1
      II=IYR
      CALL RECALC(II,0,25,0,0)
  1   CONTINUE
      IF(J.LT.0) GOTO 2
      XMAG=XGEO*CTCL+YGEO*CTSL-ZGEO*ST0
      YMAG=YGEO*CL0-XGEO*SL0
      ZMAG=XGEO*STCL+YGEO*STSL+ZGEO*CT0
      RETURN
  2   XGEO=XMAG*CTCL-YMAG*SL0+ZMAG*STCL
      YGEO=XMAG*CTSL+YMAG*CL0+ZMAG*STSL
      ZGEO=ZMAG*CT0-XMAG*ST0

      RETURN
      END
C
C
      SUBROUTINE MAGSM(XMAG,YMAG,ZMAG,XSM,YSM,ZSM,J)
C  *********************************************************************
C CONVERTS DIPOLE (MAG) TO SOLAR MAGNETIC (SM) COORDINATES OR VICA VERSA
C                    J>0              J<0
C-----INPUT: J,XMAG,YMAG,ZMAG     J,XSM,YSM,ZSM
C----OUTPUT:    XSM,YSM,ZSM       XMAG,YMAG,ZMAG
C  ATTENTION: SUBROUTINE RECALC MUST BE CALLED BEFORE MAGSM IN TWO CASES
C     /A/  BEFORE THE FIRST USE OF MAGSM
C     /B/  IF THE CURRENT VALUES OF IYEAR,IDAY,IHOUR,MIN,ISEC ARE
C          DIFFERENT FROM THOSE IN THE PRECEDING CALL OF  MAGSM
C  AUTHOR: NIKOLAI A. TSYGANENKO, INSTITUTE OF PHYSICS, ST.-PETERSBURG
C      STATE UNIVERSITY, STARY PETERGOF 198904, ST.-PETERSBURG, RUSSIA
C      (now the NASA Goddard Space Fligth Center, Greenbelt, Maryland)
C  *********************************************************************

        IMPLICIT NONE

        REAL XMAG,YMAG,ZMAG,XSM,YSM,ZSM,SFI,CFI,A(8),B(7),
     *       AB(10),BA(8)

        INTEGER J,K,IY

      COMMON/C1/ A,SFI,CFI,B,AB,K,IY,BA
      IF (J.LT.0) GOTO 1
      XSM=XMAG*CFI-YMAG*SFI
      YSM=XMAG*SFI+YMAG*CFI
      ZSM=ZMAG
      RETURN
  1   XMAG=XSM*CFI+YSM*SFI
      YMAG=YSM*CFI-XSM*SFI
      ZMAG=ZSM

      RETURN
      END
C
C
       SUBROUTINE SMGSM(XSM,YSM,ZSM,XGSM,YGSM,ZGSM,J)
C  *********************************************************************
C CONVERTS SOLAR MAGNETIC (SM) TO SOLAR MAGNETOSPHERIC (GSM) COORDINATES
C   OR VICA VERSA.
C                  J>0                 J<0
C-----INPUT: J,XSM,YSM,ZSM        J,XGSM,YGSM,ZGSM
C----OUTPUT:  XGSM,YGSM,ZGSM       XSM,YSM,ZSM
C  ATTENTION: SUBROUTINE RECALC MUST BE CALLED BEFORE SMGSM IN TWO CASES
C     /A/  BEFORE THE FIRST USE OF SMGSM
C     /B/  IF THE CURRENT VALUES OF IYEAR,IDAY,IHOUR,MIN,ISEC ARE
C          DIFFERENT FROM THOSE IN THE PRECEDING CALL OF SMGSM
C  AUTHOR: NIKOLAI A. TSYGANENKO, INSTITUTE OF PHYSICS, ST.-PETERSBURG
C      STATE UNIVERSITY, STARY PETERGOF 198904, ST.-PETERSBURG, RUSSIA
C      (now the NASA Goddard Space Fligth Center, Greenbelt, Maryland)
C  *********************************************************************

        IMPLICIT NONE

        REAL XSM,YSM,ZSM,XGSM,YGSM,ZGSM,SPS,CPS,A(10),B(15),AB(8)
        INTEGER J,K,IY

      COMMON/C1/ A,SPS,CPS,B,K,IY,AB
      IF (J.LT.0) GOTO 1
      XGSM=XSM*CPS+ZSM*SPS
      YGSM=YSM
      ZGSM=ZSM*CPS-XSM*SPS
      RETURN
  1   XSM=XGSM*CPS-ZGSM*SPS
      YSM=YGSM
      ZSM=XGSM*SPS+ZGSM*CPS

      RETURN
      END
C
C
       SUBROUTINE CLCMLT(IYYYY,DDD,UTHR,GLAT,GLON,MLT)
C--------------------------------------------------------------------
C      calculates magnetic local time
C      Inputs:
C             IYYYY..Year as YYYY, e.g. 1998
C             DDD..day of year (1.1. = 0)
C             UTHR..universal time in decimal hours
C             GLAT,GLON..latitude north and longitude east in degrees
C      Output:
C             MLT..magnetic local time in decimal hours
C      Required subroutines: DPMTRX
C--------------------------------------------------------------------
       INTEGER  IYYYY,DDD,IHOUR,MIN,ISEC
       REAL     UTHR,GLAT,GLON,MLT,DTOR,PI,XG,YG,ZG
       REAL     XXM(3),YYM(3),ZZM(3),GST,SLONG,SRASN,SDEC
       REAL     BE,CAL,SA(3),S,C,SG(3),SM(3),LAM,LAMS,DELLAM
 
       COMMON /CONST/DTOR,PI
       
       XG=COS(GLAT*DTOR)*COS(GLON*DTOR)
       YG=COS(GLAT*DTOR)*SIN(GLON*DTOR)
       ZG=SIN(GLAT*DTOR)
       CALL DPMTRX(IYYYY,DDD,XXM,YYM,ZZM)
       
C       transform
       XM=XXM(1)*XG+XXM(2)*YG+XXM(3)*ZG
       YM=YYM(1)*XG+YYM(2)*YG+YYM(3)*ZG
       ZM=ZZM(1)*XG+ZZM(2)*YG+ZZM(3)*ZG
C       
       IHOUR=INT(UTHR)
       MIN=INT((UTHR-IHOUR)*60)
       ISEC=INT((UTHR-IHOUR-MIN/60.0)*3600)
       CALL SUN (IYYYY,DDD+1,IHOUR,MIN,ISEC,GST,SLONG,SRASN,SDEC)
       BE=GST
       CAL=COS(SRASN)
       SA(3)=SIN(SDEC)
       SA(1)=COS(SDEC)
       SA(2)=SA(1)*SIN(SRASN)
       SA(1)=SA(1)*CAL
       S=SIN(BE)
       C=COS(BE)
       SG(1)=C*SA(1)+S*SA(2)
       SG(2)=C*SA(2)-S*SA(1)
       SG(3)=SA(3)       
C       transform
       SM(1)=XXM(1)*SG(1)+XXM(2)*SG(2)+XXM(3)*SG(3)
       SM(2)=YYM(1)*SG(1)+YYM(2)*SG(2)+YYM(3)*SG(3)
       SM(3)=ZZM(1)*SG(1)+ZZM(2)*SG(2)+ZZM(3)*SG(3)
C      
       LAM=ATAN2(YM,XM)
       LAMS=ATAN2(SM(2),SM(1))
       DELLAM=LAM-LAMS
       IF (DELLAM .LT. 0.) DELLAM=DELLAM+2*PI
       MLT=AMOD(DELLAM/PI*12.+12.,24.)
       RETURN
       END
C
C
       SUBROUTINE DPMTRX(IYYYY,DDD,XM,YM,ZM)
C--------------------------------------------------------------------------
C      calculates othonormal matrix (columns XM,YM,ZM) for transformation 
C      from geographic to magnetic coordinates
C      Inputs:
C             IYYYY..year
C               DDD..day of year (1.1 = 0)
C      Outputs:
C               XM,YM,ZM..colums of the matrix
C      Notes:
C      MX(N),MY(N),MZ(N)..coordinates of the B vector in geographic system 
C                for years stored in YR(N)
C      N..number of elements of arrays MX,MY,MZ and YR
C--------------------------------------------------------------------------
       INTEGER IYYYY,DDD,N
       REAL XM(3),YM(3),ZM(3),YR(10),MX(10),MY(10),MZ(10)
       REAL INTERP,YEAR,M,MXI,MYI,MZI,ZM12

       COMMON /DIPOL/ GHI1,GHI2,GHI3

       DATA N/10/

c IGRF coefficients (dipole) calculated in subroutine FELDCOF 
       MXI = -GHI2
       MYI = -GHI3
       MZI = -GHI1

C normalization of the vector of the dipole exis of the magnetic field
       M=SQRT(MXI*MXI+MYI*MYI+MZI*MZI)
       MYZ=SQRT(MYI*MYI+MZI*MZI)
       ZM(1)=MXI/M
       ZM(2)=MYI/M
       ZM(3)=MZI/M
       ZM12=SQRT(ZM(1)*ZM(1)+ZM(2)*ZM(2))
       YM(1)=-ZM(2)/ZM12
       YM(2)=ZM(1)/ZM12
       YM(3)=0.
       XM(1)=YM(2)*ZM(3)-YM(3)*ZM(2)
       XM(2)=YM(3)*ZM(1)-YM(1)*ZM(3)
       XM(3)=YM(1)*ZM(2)-YM(2)*ZM(1)
       RETURN
       END
C
C --------------------- end IGRF.FOR ----------------------------------
